Specification Sheet

Rev. C Date: 9/26/07 C.N. No. 106661
Dwg. No. 66248 Product No. Z7220-SS-LH
_________________
TEMP-GARD TUB and SHOWER VALVE
Z7220-SS-LH
TAG _______
AquaSpec
®
is a registered trademark of Zurn Industries, LLC
©2007 Zurn Industries, LLC
ZURN INDUSTRIES, LLC
♦♦
♦♦
♦ COMMERCIAL BRASS OPERATION
♦♦
♦♦
♦ 2640 SOUTH WORK STREET
♦♦
♦♦
♦ FALCONER NY 14733
Phone: [phone]
♦♦
♦♦
♦ Fax: [phone]
♦♦
♦♦
♦ World Wide Web: www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED
♦♦
♦♦
♦ 3544 Nashua Drive
♦♦
♦♦
♦ Mississauga, Ontario L4V1L2
♦♦
♦♦
♦ Phone: [phone] Fax: [phone]
OPTIONS (Check/specify appropriate options)Use with Z7000 prefix
Suffix Description
__ -BC Back Connections (1/2") (For 90
o
Installations),
Shipped as Loose Adaptors, to be Installed in the Field
__ -CC Conversion Cover Plate
__ -IP 1/2" Female Threaded Connection, Shipped as
Loose Adaptors, to be Installed in the Field
__ -MT Metal Cover, Escutcheon, & Stem Handle
__ -RC Reverse Connections (For Back to Back Installation)
__ -SC Pair of Dual Spring Check Valves
__ -STH ABS Chrome Plated Handle with Screw and Button
__ -WF Wall Mounting Flange For Fiberglass or Panel Wall Installation
ENGINEERING SPECIFICATIONS: ZURN Z7220-SS-LH
Single handle pressure balancing mixing tub and shower valve, with diverter/volume
control, single bronze stem, stainless steel balancing piston integral with stem
assembly, metal lever handle, integral service stops, and brass adjustment limit
stop screw in cap. Complete with double seal packing, adjustable brass packing
nut, and removable brass seats; all exposed trim with polished nickel chrome plated
surface. The valve hot and cold inlets and shower outlet are 1/2" female copper
sweat, the tub spout is 1/2" NPT connections.
Note: All dimensions are for reference only. Do not use for pre-plumbing
STANDARDS
Tested to meet the following standards for
valves and plumbing fittings:
ASSE Standard No. 1016
CSA Standard B125-M89
Shower heads meet ANSI A112.18.1
Meets or Exceeds ANSI A117.1M standard
for physically handicapped