Specification Sheet

Rev. G Date: 11/9/07 C.N. No. 106885
Dwg. No. 92086 Product No. Z7301-SS-MT
AquaSpec
®
is a registered trademark of Zurn Industries, LLC
©2007 Zurn Industries, LLC
ZURN INDUSTRIES, LLC
♦♦
♦♦
♦ COMMERCIAL BRASS OPERATION
♦♦
♦♦
♦ 2640 SOUTH WORK STREET
♦♦
♦♦
♦ FALCONER NY 14733
Phone: [phone]
♦♦
♦♦
♦ Fax: [phone]
♦♦
♦♦
♦ World Wide Web: www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED
♦♦
♦♦
♦ 3544 Nashua Drive
♦♦
♦♦
♦ Mississauga, Ontario L4V1L2
♦♦
♦♦
♦ Phone: [phone] Fax: [phone]
____________________________
TEMP-GARD III SHOWER UNIT
Z7301-SS-MT
TAG _______
ENGINEERING SPECIFICATIONS: ZURN Z7301-SS-MT
Single handle pressure balancing mixing shower unit, ceramic control cartridge with stainless
steel balancing piston, built in reverse connection capability (To reverse the hot and cold inlets
simply remove cartridge and turn 180
o
), two service stops / check stops, and adjustable limit
stop. When valve is turned on it must rotate from cold through to the hot position. All exposed
trim and handle are metal with polished nickel chrome plated surface. The valve is supplied with
the (ABS plastic) standard -S1 shower head, arm and flange in chrome plated finish. The valve
body is a four port valve with a tub port plug included for shower only applications. The valve
inlets, shower and tub outlet are all standard with 1/2" NPT female thread connections. The 1/2"
copper sweat options must be specified as shown below.
OPTIONS (Check/specify appropriate options)Use with Z7300 prefix
Suffix Description
___ -CPVC 1/2" Male NPT by CPVC Female Adaptors, shipped loose to be
installed in the field.
___ -EXT Extension Kit, Extends Valve Out by 1".
___ -PEX 1/2" Male NPT by Pex Adaptors, shipped loose to be installed
in the field.
___ -SSC 1/2" Female Copper Sweat Connections w/ Service Stops
___ -ST Sierra Series Decorative Metal Trim
___ -STN Sierra Series Decorative Metal Trim, in Satin Nickel Finish
___ -VB In-Line Vacuum Breaker
___ -WF Wall Mounting Flange For Fiberglass or Panel Wall Installation
Note: All dimensions are for reference only. Do not use for pre-plumbing.
Parts shown as hidden lines are supplied by others.
Additional Options
___ Z7000-SC Pair of Dual Spring Check Valves
___ Z7000-S5 Large Brass Shower Head with Spray Adjustment
___ Z7000-S6 Small Brass Shower Head with Spray Adjustment
STANDARDS
Tested to meet the following standards for
valves and plumbing fittings:
ASSE Standard No. 1016
ASME A112.18.1 / CSA B125.1
IAPMO
®
Listed
Meets or Exceeds ANSI A117.1M standard
for physically handicapped