Submittal Sheet

Z812A4-XL
TAG ____________
4” Centerset Gooseneck Faucet
ZURN INDUSTRIES, LLC 5900 Elwin Buchanan Drive, Sanford, NC U.S.A. 27330, Ph. 1-800-997-3876, Fax [phone]
In Canada: ZURN INDUSTRIES LIMITED 7900 Goreway Drive, Unit 10, Brampton, Ontario L6T 5W6, Ph. 905-405-8272, Fax [phone]
Rev. D Date: 5/22/2018 C.N. No. SAN008262 Prod. | Dwg. No. 92997
Architectural/Engineering Specication:
Architectural/Engineering Approval
The information contained in this document is subject to change without notice.
Please contact Zurn for most up to date information.
Polished chrome-plated cast brass faucet body with
integral shanks, quarter turn ceramic disc cartridges and
a 3-1/2” [89mm] centerline rigid or swing gooseneck
spout. Unit is furnished with a 2.2 GPM [8.3 L] pressure
compensating aerator (complying with ANSI A112.18.1
Standard for ow), 4” [102mm] vandal-resistant color-
coded metal wrist blade handles, mounting hardware and
1/2” NPSM coupling nuts for standard lavatory risers.
Aerator Options:
Flow rate GPM [LpM] Vandal Resistant Pressure Compressation Outlet Type
-2F
2.2[8.3]
 
Aerator
-3F
0.5[1.9]
 
Spray
-4F
2.2[8.3]
 
Laminar
-7F
1.0[3.8]

Spray
-16F
1.0[3.8]
 
Spray
-17F
1.5[5.7]
 
Aerator
-18F
1.5[5.7]
 
Laminar
-22F
1.0[3.8]

Laminar
-25F
0.35[1.3]
 
Spray
Product Features:
• Heavy-duty quarter turn ceramic disc cartridge
• Low-lead compliant, chrome-plated cast brass body
• 3-1/2” gooseneck spout
• 4” color coded wrist blade handle
• 2.2 GPM aerator
Zurn Lead Free products (-XL) is the line of durable, high
quality brass faucets and xtures that are designed and
manufactured to comply with Section 1417 of the Safe
Drinking Water Act (SDWA) which mandates the weighted
average lead content of no more than 0.25% of the wetted
surface.
• ADA Compliant
• Zurn Lead Compliant
Compliance and Certication:
This product should be used with a WaterSense
labeled counterpart with a compatible ush volume to
ensure that the entire system meets the requirements for
water efciency and performance.
Note:
Sufx Options:
-FC 2.0 GPM [7.6 L] Laminar Flow Control in
Base of Spout
-FC _____ Plain end spout with Flow Control
(Specify GPM Flow: 0.5, 1.0, 1.5)
-G 1-1/4” [32mm] Grid Strainer Drain
-P 1-1/4” [32mm] Pop-up Drain
-140 Restricted 140° Swing Spout
-Other