Installation Sheet

PAGE 1 OF 2
ZURN INDUSTRIES, LLC 5900 Elwin Buchanan Drive, Sanford, NC U.S.A. 27330, Ph. 1-800-997-3876, Fax [phone]
In Canada: ZURN INDUSTRIES LIMITED 7900 Goreway Drive, Unit 10, Brampton, Ontario L6T 5W6, Ph. 905-405-8272, Fax [phone]
Rev. C Date: 6/25/2018 C.N. No. SAN008311 Prod. | Dwg. No. CF1192
®
AQUASPEC FAUCETS
MODEL - Z87100-XL SERIES
Z87100-XL-HS SERIES
KITCHEN SINK FAUCET
TECHNICAL INFORMATION
*OTHER AERATORS AVAILABLE BY REQUEST
MAINTENANCE
INSTALLATION INSTRUCTIONS
1. REMOVE FAUCET BODY(#6) FROM CARTON AND APPLY PLUMBERS PUTTY TO UNDERSIDE OF BODY. (REFER TO
FIGURE 1).
2. PLACE FAUCET ON SINK AND REMOVE MOUNTING NUTS (#7).
3. HAND TIGHTEN MOUNTING NUTS (#7) FROM UNDER SINK. MAKE SURE FAUCET IS CENTERED PROPERLY. DO NOT
OVER TIGHTEN.
4. OPTIONAL HOSE SPRAY (REFER TO FIGURE 2). REMOVE HOSE SPRAY ASSEMBLY (#12) FROM PACKAGING. RE-
MOVE MOUNTING NUT FROM HOSE SPRAY HOLDER (#12) AND INSERT HOSE SPRAY HOLDER THROUGH FIXTURE.
ASSEMBLE MOUNTING NUT ONTO HOSE SPRAY HOLDER AND TIGHTEN. DO NOT OVER TIGHTEN. INSERT THREAD-
ED END OF HOSE SPRAY (#12) THROUGH HOSE SPRAY HOLDER (#12) AND CONNECT HOSE SPRAY (#12) TO DI-
VERTER ADAPTOR (#11). TIGHTEN TO CREATE A WATER TIGHT CONNECTION.
5. ATTACH LAVATORY SUPPLIES TO FAUCET WITH RISER NUTS (ITEM #7B).
6. OPTIONAL GRID STRAINER (-G) / HANDICAP OFFSET GRID DRAIN (-GH) INSTALL GRID STRAINER IN SINK OUTLET
AND PLUMB WASTE CONNECTION.
7. INSTALL SPOUT INTO BASE AND TIGHTEN NUT (SEE VIEWS FOR SWING/RIGID CONNECTION).
8. TURN SUPPLY WATER ON AND OPERATE FAUCET CHECKING FOR LEAKS.
9. REPLACE HANDLE SCREWS AND COLOR INDEX BUTTONS.
10. INSTALL AERATOR INTO FAUCET AND HAND TIGHTEN. IT MAY BE NECESSARY TO UNSCREW AND CLEAN AERATOR
AT START-UP.
FLOW: 2.2 GPM [8.3 L] PRESSURE COMPENSATING AERATOR
MAXIMUM PRESSURE: 125 PSI
MAXIMUM TEMPERATURE: 180
O
F
F
HANDLE NUT TORQUE: 15-20 FT-LBS
CARTRIDGE STYLE: QUARTER TURN CERAMIC DISK
1. YOUR ZURN AQUASPEC FAUCET HAS A HIGHLY POLISHED NICKEL CHROME PLATED FINISH. CLEAN WITH SOAP
AND WATER OR A MILD CLEANER WHICH IS SAFE FOR CHROME PLATING. DO NOT USE ACIDS OR TOILET BOWL
CLEANER AS THEY WILL DAMAGE THE FINISH.
2. AQUASPEC FAUCETS CONTAIN CERAMIC DISK CARTRIDGES WHICH REQUIRE NO MAINTENANCE. TO REMOVE THE
CARTRIDGE, SHUT THE WATER OFF, LOOSEN THE HANDLE NUTS AND PULL UP ON THE CARTRIDGE.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
ADVERTENCIA: Cáncer y daño reproductivo - www.P65Warnings.ca.gov
AVERTISSEMENT: Cancer et effets néfastes sur la reproduction - www.P65Warnings.ca.gov