Specification Sheet

ZURN INDUSTRIES, LLC.


 COMMERCIAL BRASS OPERATION


 5900 ELWIN BUCHANAN DRIVE


 SANFORD NC 27330
Phone: [phone]


 Fax: [phone]


 World Wide Web: www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED


 3544 Nashua Drive


 Mississauga, Ontario L4V1L2


 Phone: [phone] Fax: [phone]
AquaVantage
®
and AV are trademarks of Zurn Industries, LLC.
AquaSense
®
is a registered trademark of Zurn Industries, LLC.
Exposed ZER6000PL-CPM Model
Sensor Operated Battery Powered Flush Valve
For Water Closets
Suffix Options (Check/Specify Appropriate Options)
_____ -YJ Split Ring Pipe Support
_____ -YK Solid Ring Pipe Support
_____ -YO Bumper On Angle Stop
_____ Other
This space is for Architectural/engineering Approval
Flow Options
-WS1 1.6 Gal. Low Consumption
-FF 4.5 Gal. Full Flush
Standard Flush 3.5 Gallons Per Flush
Rev. Date: 10/20/08
Dwg. No. 200023 Product No. ZER6000PL-CPM
ENGINEERING SPECIFICATION: ZURN ZER6000PL-CPM
AquaSense Exposed Closet Flush Valve - Exposed,
quiet diaphragm-type, chrome plated flushometer valve with
a polished exterior. Complete with chloramine resistant, dual
seal diaphragm with a clog resistant by-pass. The valve
incorporates a 6VDC motor actuator, a battery powered
automatic sensor, high impact resistant polycarbonate
housing and chrome plated metal cover with manual override
push button and 10 degree angled sensor, high back
pressure vacuum breaker, one piece hex coupling nut,
adjustable tailpiece, spud coupling and flange for top spud
connection. Control stop has internal siphon-guard protec-
tion. The AquaFlush
®
Plus is also furnished with a sweat
solder kit, vandal resistant stop cap, and cast wall flange
with set screw. Internal seals are made of chloramine
resistant materials.
AquaSense



Model
TAG