Specification Sheet

SPECIFICATION SHEET
TAG _______
Dimensional data (inches and [mm]) are subject to manufacturing tolerances and change without notice.
Zurn Industries, LLC
| Specification Drainage Operation
1801 Pittsburgh Avenue, Erie, PA U.S.A. 16502 · Ph. 855-663-9876, Fax [phone]
In Canada
| Zurn Industries Limited
3544 Nashua Drive, Mississauga, Ontario L4V 1L2 · Ph. 905-405-8272, Fax [phone]
www.zur n.com
* Regulary furnished unless otherwise specified
ZS880
STAINLESS STEEL
LINEAR SHOWER DRAIN
ENGINEERING SPECIFICATION: ZS880
All Type 304 (CF8) Fabricated Stainless Steel Linear Shower
Drain. Complete with vertically adjustable anchoring support
legs, anti-ponding V-shaped channel with 2" [51mm] No-Hub
center outlet, adjustable secured leveling frame with built-in
tile edge, integral membrane flange for glue on waterproofing
membrane, and secured, light-duty, slotted heel-proof grate.
Drain is designed for installation in a minimum 2" [51mm]
concrete pour and can be adjusted to accommodate 1/4"
[6mm] and 3/8" [10mm] finished tile thicknesses.
OPTIONS (Check/specify appropriate options)
PREFIXES
____ ZS All Type 304 (CF8) Stainless Steel*
____ ZR All Type 304 (CF8) Stainless Steel w/ Oil-Rubbed
Bronze Finish
GRATE OPTIONS
____ -BW Basket Weave Grate
____ -DB Decorative Block Grate
____ -SG Serenity Grate
____ -TG Tile In-Lay Grate
____ -WG Wave Grate
SUFFIXES
____ -2 Two Bottom Outlets (2 [51] No-Hub, Not
Available on Size -12)
____ -2IP 2 [51] Female IP Threaded Outlet
____ -3 Three Bottom Outlets (2 [51] No-Hub, Not
Available on Size -12)
____ -EO End Bottom Outlet (2 [51] No-Hub, Not Available
on Size -12)
____ -FS Outlet Filter Screen
____ -LB Lower Body With Membrane Clamp Collar
____ -SO Side Outlet (2 [51] No-Hub), Not available
with -LB Option
PAT. NO.
8,347,424
Rev. F
Date: 01/20/16
C.N. No. 133837
Prod. | Dwg. No. ZS880
Dimensions In Inches [mm]
Approx.
Wt.
Lbs. [kg]
Grate
Open Area
Sq. In. [cm
2
]
Product
Designation
-12 12 [305] 14 [356] 2.9 [1.3] 6 [38]
-28 28 [711] 30 [762] 5.4 [2.5] 15 [97]
-32 32 [813] 34 [864] 5.9 [2.7] 18 [116]
-36 36 [914] 38 [965] 6.4 [2.9] 20 [129]
-40 40 [1016] 42 [1069] 7.2 [3.3] 22 [142]
-48 48 [1219] 50 [1270] 8.4 [3.8] 27 [174]
-60 60 [1524] 62 [1575] 10.3 [4.7] 34 [219]
-72 72 [1829] 74 [1880] 12.4 [5.6] 41 [265]
AB