Specification

ZTR6200
TAG ____________
Battery Powered Exposed Sensor Flush Valve
for Water Closets
US 1.855.ONE.ZURN CANADA 1.905.405.8272 ZURN.COM
ZURN INDUSTRIES, LLC 511 W. Freshwater Way, Milwaukee, WI U.S.A. 53204 · Ph. 1-855-ONE-ZURN, Fax [phone]
In Canada: ZURN INDUSTRIES LIMITED 7900 Goreway Drive, Unit 10, Brampton, Ontario L6T 5W6, Ph. 905-405-8272, Fax [phone]
Rev. C Date:
11/03/21 C.N. No. 143464 Prod. | Dwg. No. SS ZTR6200
Valve Height Options:
A
Standard 11 1/2” [292]
-1 16” [406]
-2 24” [610]
-3 27” [686]
*This product should be used with a WaterSense
labeled counterpart with a compatible flush
volume to ensure that the entire system meets the
requirements for water e󰀩ciency and performance.
Certied by
IAPMO R&T
• ADA Compliant - Operational Controls
• WaterSense Compliant
Compliance and Certication:
Product Features:
• Proprietary Dezincication resistant low lead brass alloy
• Control Stop has internal siphon-guard protection and
vandal resistant stop cap, Sweat solder kit, wall ange
with set screw.
• High back pressure Vacuum Breaker with one piece hex
coupling nut
• Chloramine resistant Internal seals
• Adjustable tailpiece
• Spud coupling and ange for top spud connection
Architectural/Engineering Specication:
Exposed, quiet piston-type, chrome plated ushometer valve
with a polished exterior. Complete with chloramine resistant,
ltered piston kit. The valve incorporates a battery powered
solenoid actuator, automatic sensor with manual override
push button, and robust vandal resistant metal cover with
10 degree angled sensor.
Architectural/Engineering Approval
The information contained in this document is subject to change without notice.
Please contact Zurn for most up to date information.
Su󰀩x Options:
-DF Dual Flush Option (See Chart Above)
-FM12 Floor Mount 12” Rough In
-LL 10 Year Long Life Battery
-YJ Split Ring Pipe Support
-YK Solid Ring Pipe Support
-YO Bumper on Angle Stop
Note: Dual Flush feature has 60 second threshold
Flush Volume gpf [Lpf] Dual Flush WaterSense Labeled*
-ONE 1.1 gpf [4.1 Lpf]

-EV 1.28 gpf [4.8 Lpf]

-WS1 1.6 gpf [6.1 Lpf] 1.6/1.1 Gpf
[6.1/4.1 Lpf]
Flow Options:
WHEN INSTALLING IN A HANDICAP STALL:
Per the ADA Guidelines (section 604.9.4) it is recommended
that the grab bars be split or shifted to the wide side of the
stall. If grab bars must be present over the valve, use the
alternate ADA installation as shown on the next page.