User manual

Driver and Utility Installation

1. Do not connect PHOTO HARDDISK to computer yet.

2. Insert the installation CD into computer’s optical

drive, the installation window should

automatically appear on the screen. If the

installation window doesn’t show up, go to “My

Computer” and select the optical drive containing

the CD, select and execute “autorun.exe,” the

installation window will appear.

3. Select and click “Install Driver and Utility,” follow

the on screen instructions to install the utility

software or device driver for Windows 98SE.

4. After the software is successfully installed, you can connect PHOTO HARDDISK to computer. Please

refer to “Connecting to PC” for cable connection instructions.

5. When PHOTO HARDDISK is connected to computer, the operating system will recognize the device

(may take up to 2 minutes) and add 3 new drives to the system. These are the 4-in-1 card reader,

the CF/MD card reader, and the hard disk drive in the PHOTO HARDDISK