User manual

Web Configuration
!
!
3. Under Download unsigned ActiveX controls, click Prompt
(recommended) or Enable.
!
!
Select Enable or Prompt under
Download unsigned ActiveX controls
!
!
!
Click OK
!
4. Click OK. Click OK again to save changes.
!
Step 2 of 2: Log into camera:
1. Connect the camera to your l o c a l network and find the camera’s IP
address. See “4. Finding the Camera’s IP Address” on page 9.
2. Enter the camera’s IP address in the address bar in the f o ll owing f o rmat:
http://
http://192.168.0.120:80
!
IP address
Colon
HTTP port number
!
NOTE: You can also connect to the camera using a DDNS address (DDNS
setup and port forwarding required; see “5. Configuring Remote
Connection” on page 12 for det a ils).
3. Under User Name and Password, enter the camera’s User Name
(default: admin) and Password (default: admin) and click Login.
!
!
!
!
Enter Camera User Name (default: admin)
Enter Camera Password (default: admin)
Click Login