Datasheet

Simple Setup – Just Four Steps
1. Place the Z-Base 580 system.
2. Connect the Z-Base 580 to your TV and/or audio devices.
3. Learn the features and controls of the Z-Base 580.
4. “Teach” the Z-Base 580 to respond to your preferred remote.
1. Speaker placement
You can place the Z-Base 580 on any flat, stable surface near
your TV – but most people place the ZVOX system on a piece of
furniture, and then place their TV on top of the
ZVOX system.
A safe installation is the ZVOX Audio system owner’s
responsibility.
A TV heavier than 160 lbs should not be placed directly on top of
the Z-Base 580. Please confirm the pedestal base of the TV rests
securely on top of the Z-Base 580. No portion of the TV base
should extend beyond the edges of the top of the speaker.
A flat panel TV has a high center of gravity. Please confirm the
furnishings supporting your TV and the ZVOX Audio speaker
are stable and secure. The surface supporting the ZVOX Audio
speaker/TV combination should not move in any direction.
Most TV manufacturers recommend that a flat panel TV be
anchored to a secure vertical surface with a tether. This prevents
a household accident from causing a TV to fall off its supporting
surface. ZVOX Audio recommends you heed this and all
installation recommendations made by the TV manufacturer.
2. Connecting Your TV To The ZVOX System
A. Connect your cable box, DVD player, etc. to your TV the way
you normally do. You probably have a cable box or satellite
receiver, and a DVD or Bluray player connected to your TV. You
may also have a game console or VCR connected. Leave all
these sources connected to your TV’s
inputs – you don’t need to change
them. You should not need to connect
the audio output of any video source
directly to a ZVOX Audio speaker.
B. Connect the audio output of your
TV to the input of the ZVOX system.
Different TVs have different audio
output options. Check the back panel
of your TV for one of the following:
Optical digital
audio output
(small square port,
often with a central cover flap)
Coaxial digital audio output (single
RCA-style connecting jack).
Analog audio output
(dual RCA-style connecting jacks -
red and white) – OR a single 3.5mm
“mini jack.”
Some smaller TVs don’t have any
of the above connections, but do
have a headphone jack (3.5mm
mini jack).
If your TV has an optical digital output
jack, use an optical digital (toslink)
connecting cord to connect to the Optical digital input on the back
of the ZVOX system.
If your TV has a coaxial digital
output jack, any phono plug to
phono plug connecting cable can
connect this jack to the coaxial
digital input jack on the Z-Base 580.
After making the signal
connection, connect the AC
Stable Placement. Do not place the Z-Base 580 on an
unstable cart, stand, bracket or table. The Z-Base 580 may
fall, causing serious injury to a child or adult and serious
damage to the product. Do not use the Z-Base 580 on any
unstable surface.
Placement of a TV on the Z-Base 580. Televisions weighing
less than 160 pounds, and with base dimensions of less than 35" in width and
less than 15" in depth, can be placed on top of the Z-Base 580—BUT ONLY
WHEN THE FOLLOWING SAFETY PRECAUTIONS ARE STRICTLY OBSERVED.
PLACING A TV ON TOP OF THE Z-BASE 580 WITHOUT FOLLOWING ALL THE
PRECAUTIONS IS DANGEROUS AND SHOULD NOT BE DONE.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
Important Safety Instructions
Special Safety Warnings Regarding Placement of Z-Base 580 and Other Equipment
READ THIS FIRST
Important Safety Instructions For ZVOX Z-Base 580 System
WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
THIS APPLIANCE SHALL NOT BE EXPOSED TO DRIPPING OR
SPLASHING WATER AND NO OBJECT FILLED WITH LIQUIDS SUCH
AS VASES SHALL BE PLACED ON APPARATUS.
CAUTION
RISK OF ELECTRICAL
SHOCK, DO NOT OPEN
This lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electrical shock to persons.
The exclamation point
within an equilateral
triangle is intended to
alert the user to the
presence of important
operating and
maintenance (servicing)
instructions in the
literature accompanying
the appliance.
Warning: To reduce the risk of
electrical shock, do not remove
cover (or back) – no serviceable
parts inside. Refer servicing to
qualified service personnel.
The television must weigh 160 pounds or less.
The base of the TV, or the TV stand, must be 35" wide or less.
The base of the TV, or the TV stand, must be 15" deep or less.
The TV MUST be anchored to the rear wall using anchor bolts and
supporting cables supplied by the TV manufacturer, following the
installation guidelines provided by the TV manufacturer.
Be sure to take measures to prevent the Z-Base 580 from becoming
uneven or unstable. Install the Z-Base 580 on a solid and flat surface.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
15. Grounding or Polarization–This product may be equipped with a
polarized alternating-current line plug (a plug having one blade wider
than the other). This plug will fit into the power outlet only one way.
This is a safety feature. If you are unable to insert the plug fully into
the outlet, try reversing the plug. If the plug should still fail to fit,
contact your electrician to replace your obsolete outlet. Do not defeat
the safety purpose of the polarized plug.
Alternate Warnings–This product is equipped with a three-wire
grounding-type plug, a plug having a third (grounding) pin. This plug
will only fit into a grounding-type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet, contact your
electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the grounding-type plug.
16. Ventilation–Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product and to
protect it from overheating, and these openings must not be blocked
or covered. The openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface. This product
should not be placed in a built-in installation such as a bookcase
or rack unless proper ventilation is provided or the manufacturer’s
instructions have been adhered to.
17. The MAINS plug or an appliance coupler is used as the disconnect
device, the disconnect device shall remain readily operable.
18. CLASS II apparatus with double insulation, and no protective earth
provided.
Typical TV Back-
Panel Connectors
Optical connecting cord
ZVOX Back Panel Connectors