User Manual

Placing The AV120 TV Speaker in
Front of the TV.
Most people choose to place the ZVOX speaker in front of the TV.
But it can also be placed on any level surface near the TV – above,
below or to the left or right. Choose a place that lets you direct the
ZVOX Speaker towards the TV viewers.
• A safe, secure installation of the AccuVoice TV Speaker is the
owner’s responsibility.
• Do not place any objects on top of the AccuVoice
TV Speaker.
Placement Options
TV to AV120 Audio Signal
Cable Guide
The AV120 includes two analog signal cables and one optical
digital signal cable. The optical cable has a standard optical plug
on one end and a mini optical plug on the other end. One of these
three cables will connect from most TVs or cable/satellite set top
boxes to the input on the AV120. In the rare instance your TV
or cable/satellite set top box has only an optical minijack audio
output, an optical miniplug to optical miniplug cable is needed
(not supplied with the AV120).
Audio cables supplied with the ZVOX TV Speaker
standard optical plug
to
analog miniplug
analog miniplug
to
analog miniplug
red and white
RCA plugs
to analog miniplug
DC IN
Optical
Line In
USB
USB Input
Insert an external USB ash drive to hear audio tracks, like
MP3s play externally from the AV120. Use the BACK and FWD
buttons on the AV120 remote to toggle back and forward to
audio tracks on your USB Drive. MP3 Files may be in the root
or in folders.
USB Flash Drive
Bluetooth setting.
You may play audio from your Smart phone, tablet, laptop or
Bluetooth capable TV to the AV120 as well.
Simply press the INPUT button on the AV120 remote until the
AV120 display on the front of the speaker blinks blue which
signals the sound bar is in pairing mode. It will stay solid blue
once paired with device.
Manual On/Off Operation
With the unit on, press and hold the “Other Settings” button for
5 seconds. If the LED blinks RED 3X, the auto On/Off feature is
disabled.
The remote must be used to turn the unit on and off.
If the LED blinks BLUE 3X, the auto On/Off feature is being re-
enabled. The Auto On/Off toggle only works if the minijack input
is selected. It will automatically turn off 30 seconds after a loss
of digital signal OR several minutes after an analog signal has
stopped.
ZVOX AV120 | Cables and Placement 3