User Manual

4 Quick Setup Guide
a
Alternative Ways To Connect The AccuVoice TV Speaker Model AV157
If your TV doesn’t have an optical audio output, here are some other options:
MINIJACK
HEADPHONE/
SUBW OUTPUT
MINIJACK
ANALOG
INPUT [2]
OPTICAL
DIGITAL
INPUT [1]
15 VDC 2A
POWER
AV157
MINIJACK
HEADPHONE/
SUBW OUTPUT
MINIJACK
ANALOG
INPUT [2]
OPTICAL
DIGITAL
INPUT [1]
15 VDC 2A
POWER
AV157
b
Back of TV
Minijack Analog Audio Out
Many TVs have an audio output minijack (sometimes labeled “Audio Out”) or
headphone jack. Insert one end of the supplied analog "miniplug to miniplug"
cable into the TV's audio out minijack. Insert the miniplug at the other end of the
cable into the ZVOX speaker input jack labeled MINIJACK ANALOG INPUT.
Once you have connected the cable to the ZVOX speaker, follow step 4 from
the front page of this manual. After you have turned on the ZVOX speaker, press
the INPUT button on the ZVOX speaker remote control until you see “In2A”
appear. This selects the analog minijack input.
Red and White RCA Jack Analog Audio Out
Some TVs use red/white RCA jacks for the analog audio output. Be sure you
have located red and white jacks on the TV that are marked as an “OUTPUT”
(not “INPUT”). Next, identify the cable supplied with the ZVOX speaker that has
a stereo miniplug at one end and red and white RCA plugs at the other end.
Make The Connection
Insert the red and white plugs into the red and white jacks on the TV labeled
“OUT”. Insert the miniplug at the other end of the cable into the ZVOX speaker
input jack labeled MINIJACK ANALOG INPUT.
Once you have connected the Analog Audio signal cable to the ZVOX speaker,
follow step 4 from the front page of this manual. If you don’t hear sound, press
the input button on the ZVOX remote control until you see In2A. This indicates
the analog audio input has been selected.
MINIJACK
HEADPHONE/
SUBW OUTPUT
MINIJACK
ANALOG
INPUT [2]
OPTICAL
DIGITAL
INPUT [1]
15 VDC 2A
POWER
AV157
Connect To Your Cable Or Satellite TV Set Top Box
If your TV’s audio output is inaccessible (on a wall-mounted TV, for instance)
or unavailable, you can connect the audio output of your cable or satellite set
top box to the ZVOX speaker. Most set top boxes have an “audio output” in
addition to the HDMI output intended for use with the TV.
To connect between the cable box red and white jacks and the ZVOX speaker,
identify the cable supplied with the ZVOX speaker that has a stereo miniplug at
one end and red and white RCA plugs at the other end.
Follow the “Make The Connection” instructions in the previous column.
c
Back of
Cable/Sat Set Top Box
Back of TV
Back of
Cable/Sat Set Top Box