User Manual

AV157 European edition 5
Using Both Audio Inputs on the AccuVoice TV Speaker AV157
If you have your TV's optical digital output connected to the AV157’s optical
digital input, you could also use the AV157’s analog minijack input for a second
audio source. You can also connect an analog audio source to the AV157’s
MINJACK ANALOG INPUT. This second source could be music from a portable
audio device, an audio disc in a player or connect an analog audio source to the
AV157’s MINJACK ANALOG INPUT.
To hear an audio source connected to the analog audio input on the ZVOX
AV157 TV Speaker, press the INPUT button on the ZVOX remote control until
you see IN2A appear on the front of the ZVOX speaker.
Connection Options
Placing The AccuVoice TV Speaker in Front of the TV.
Most people choose to place the ZVOX speaker in front of the TV. But it can also
be placed on any level surface near the TV – above, below or to the left or right.
Choose a place that lets you direct the ZVOX Speaker towards the TV viewers.
• A safe, secure installation of the AccuVoice TV Speaker is the
owner’s responsibility.
• Do not place any objects on top of the AccuVoice TV Speaker.
Placement Options
ZVOX Speaker Wall Mounting Information
The AV157 speaker has two M3 threaded sockets in the enclosure back.
Two 10mm length screws are provided for these sockets. With the correct
additional hardware, you can use these sockets to secure the ZVOX AV157
speaker to most at surfaces, like a wall or shelf. Longer screws may be
necessary NOTE: It is the ZVOX AV157 owner’s responsibility to ensure the
any such mounting is safe and secure. Each of the two mounting sites should
be able to secure a ve pound (3 KG) object.
TV to AV157 Audio Signal Cable Guide
The AV157 includes two analog signal cables and one optical digital signal
cable. One of these three cables will connect from most TVs or cable/
satellite set top boxes to the digital or analog input on the AV157. In the rare
instance your TV or cable/sat set top box has only an optical minijack audio
output, an optical miniplug to standard optical plug cable is needed (not
supplied with the AV157).
from TV or set top box
to AV157
Audio cables supplied with the AccuVoice TV Speaker AV157
standard optical plug
to
standard optical plug
analog miniplug
to
analog miniplug
red and white
RCA plugs
to analog miniplug
Headphone or Subwoofer Output Minijack
This minijack provides a signal for use with headphones or an amplied
subwoofer. The signal level from this output varies with the volume setting of
the ZVOX speaker. If you wish to mute the output of the ZVOX speaker while
listening to headphones, press and hold the MUTE button on the ZVOX speaker
remote control for about ve seconds (a “long press”). “HP” will appear on the
ZVOX speaker display screen, indicating headphone-only operation. A second
long press of the same MUTE button cancels headphone-only operation.
Pressing the POWER button on the ZVOX speaker remote control also cancels
headphone-only operation.
MINIJACK
HEADPHONE/
SUBW OUTPUT
MINIJACK
ANALOG
INPUT [2]
OPTICAL
DIGITAL
INPUT [1]
15 VDC 2A
POWER