User's Manual

ENG - 16
Mode & Level Settings
Function LED Behavior Description
Surround Level
Two center LEDs indicate
surround level 0.
LEVEL > Surr Lvl > Use the Next/Previous buttons to increase/decrease the surround
sound level. The LED indicators will move to the top with increasing level and to the bottom
with decreasing level.
Note: Surround must be ON to adjust the surround level.
Surround Balance
Two center LEDs
indicate surround
balance is centered.
LEVEL > Surr Bal > Use the Next/Previous buttons to increase/decrease the surround
balance level on each side. The LED indicators will move to the top with balance levels to the
right and down with balance levels to the left.
Info
—
SETUP > Info > OK to have the sound bar verbally announce the current sound bar input
and audio type being played with corresponding LED indicators.
Auto VA
SETUP > Auto VA > Use the Next/Previous buttons to toggle between connecting
the sound bar to a Voice Assistant through Bluetooth (BT), AUX, Both, or OFF. Refer to
Connecting to a Voice Assistant on page 23 for more information.
Note: Default setting is Both.
Eco Power Mode
Eco Power Mode
On
SETUP > EcoPwr > Use the Next/Previous buttons to enable/disable Eco Power Mode.
When ON, the sound bar will go into standby after a period of inactivity. The sound bar will
automatically turn o when no audio signal is detected. O disables this feature.
Note: Default setting is O
Eco Power Mode
O
Input Search
The LED indicator
color will change
per specic input.
SETUP > Input Search > OK to initiate an automatic input detection sequence. This is the
same as a long key press of the INPUT button on the remote. Specic inputs will show a
dierent LED color:
• AUX In: Green
• AUX VA: Violet
• Digital Optical: Red
• HDMI (ARC): Magenta
• Bluetooth: Blue
• USB: Orange
Surr Lvl
Surr Bal
Info
Auto VA
Eco Pwr
BT
AUX
O
Both
Input Srch