User Manual

Mute Filters: Low-Cut And High-Cut Sliders

Sounds outside the bounds defined by these sliders are either bypassed or muted, depending on the state of the Mute switch. Drag these to

adjust the cut-off point. CTRL-Click anywhere on the Keyboard Thumbnail to reset these. When the Low-Cut slider is dragged to the right past

the High-Cut slider, the range between the sliders is bypassed/muted, not the range outside of the sliders. Please note: THESE ARE NOT

FILTERS! When in Mute mode, any sound that has it’s base pitch in the are that is Muted will be removed, including its harmonics, transients

and noise components. Think in terms of muting channels on a mixing desk.

Mute Switch

This control defines wether the material outside of the boundaries defined by the Low-Cut and High-Cut parameters is Bypassed or Muted.

Lower Keyboard

The Lower Keyboard has multiple functions. Firstly, it serves as a reference grid for the sounds shown in the Display. Secondly, it serves as

source pitch grid for the Pitch Mapping Sliders. Thirdly, it is used to edit the Bypass and Xclude states per source pitch. Think of the keys of the

Lower Keyboard like mixer channels (with every pitch that is contained in your recording having its own mixer channel) and you’ll get the hang

pretty fast. Also displays which MIDI note is being pressed when in MIDI MAP mode.

zynaptiq PITCHMAP Quick Start Guide v 1.0

Page 24