User Manual

30 User Manual v 1.0.0
UNFILTER
Learning Section
LEARN
RESET
DCY
AVG
Activates learning. When off, the current transfer function is
kept and static. When active, the transfer function estimate
is continuously updated. Generally, you should keep this on
until the red curve essentially “settles down”, unless you
want to apply the current transfer function to another signal
or want to apply the same processing to all channels (see
LINK).
Resets the transfer function estimate to default, so LEARNing
will restart from a neutral state.
Sets the rate at which the LEARNed transfer function
estimation decays, or how long the algorithm “remembers”
the peaks identified as filter components (which are defined
by the AVG control). At maximum DCY, memory has an
infinite duration (nothing is ever “forgotten”), lower values
will adapt the transfer function to changes in the signal. In
general, set this to max for removing static anomalies like EQ
or room resonance from your signal, and lower this value if
you need to process time-varying sounds or remove varying
anomalies.
Adjusts the time constant that is used to determine which
signal components are considered to be part of the transfer
function. The higher this value, the longer a component must
persist to be considered a filter feature.