User Manual

19 User Manual v 1.5
UNVEIL
TRANSIENT THRESH
GAIN
I/O DIFF
UNVEIL offers the option to automatically bypass very short
transient signals in order to increase "punch" and
intelligibility for certain types of signals. This bypass is
triggered both by evaluating overall signal levels as well as
its statistical properties. We recommend you use the SOLO
switch to monitor the output of this circuitry and use the
threshold slider to set an appropriate value between 0 ( =
everything is regarded a transient) and 1 ( = circuit is off,
nothing goes through).
This control adjusts the output gain of the plug-in, the unit is
dB. Processes based on perceptive modeling generally tend
to change peak levels. The GAIN control allows you to
compensate for this.
Activating this switch creates a volume compensated
difference between input and output signal.