Internet Security Appliance User's Guide

Chapter 41 Wireless Setup
ZyWALL 5/35/70 Series User’s Guide
657
Figure 398 Menu 7.2: TCP/IP and DHCP Ethernet Setup
The DHCP and TCP/IP setup fields are the same as the ones in Menu 3.2 - TCP/IP and
DHCP Ethernet Setup. Each public server will need a unique IP address. Refer to Section
37.4 on page 634 for information on how to configure these fields.
" DMZ, WLAN and LAN IP addresses must be on separate subnets. You must
also configure NAT for the WLAN port (see Chapter 44 on page 673) in menus
15.1 and 15.2.
41.2.2 IP Alias Setup
You must use menu 7.2 to configure the first network. Move the cursor to the Edit IP Alias
field, press [SPACE BAR] to choose Yes and press [ENTER] to configure the second and
third network.
Pressing [ENTER] opens Menu 7.2.1 - IP Alias Setup, as shown next.
Menu 7.2 - TCP/IP and DHCP Ethernet Setup
DHCP= None TCP/IP Setup:
Client IP Pool:
Starting Address= N/A IP Address= 0.0.0.0
Size of Client IP Pool= N/A IP Subnet Mask= 0.0.0.0
RIP Direction= None
Version= N/A
Multicast= IGMP-v2
Edit IP Alias= No
DHCP Server Address= N/A
Press ENTER to Confirm or ESC to Cancel: