Network Device User's Guide Omni 56K Plus Series

Omni 56K Plus Series User’s Guide
4-14 Command Sets
Table 4-11 Service Class 2.0 Commands
COMMAND DESCRIPTION VALUE
Page Width wd=0:1728 pixels in 215mm
wd=1:2048 pixels in 255mm
wd=2:2432 pixels in 303mm
Page Length ln=0:A4;297mm
ln=1:B4;364mm
ln=2:unlimited length
Data Compression Format df=0:1-D
df=1:2-D
Error Correction ec=0:Disable
Binary File Transfer bf=0:Disable
Minimum Scan Time/Line st=0:0 ms
st=1:5 ms
st=2:10 ms (normal); 5 ms (fine)
st=3:10 ms
st=4:20 ms (normal); 10 ms (fine)
st=5:20 ms
st=6:40 ms (normal);20 ms (fine)
st=7:40 ms
+FIS=vr,br,wd,ln,df,ec,bf,st Current Session negotiating parameters The same as above
+FCS=vr,br,wd,ln,df,ec,bf,st Current Session Parameters The same as above
+FLI=”string” Local Facsimile station ID String, TSI/CSI
+FPI=”string” Local Facsimile station ID String, CIG
+FLP=n Indicate Document available for polling n=0:No document
n=1:A document is available
+FSP=n Enable/Disable polling n=0:Disable
n=1:Enable
+FNR=rpr,tpr,idr,nsr Negotiation Reporting Enable rpr= 0:Receiver parameters are
not reported.
rpr=1:Receiver parameters are
reported.
tpr= 0:Transmitter parameters are
not reported.
tpr=1:Transmitter parameters are
reported.
idr= 0: ID Strings are not reported.
idr=1: ID Strings are reported.
nsr= 0:Non-standard frames are
not reported.