User's Manual

Chapter 5 WAN Setup
CellPipe 7130 RG User’s Guide
117
IPoE
This screen displays when you select IP over Ethernet in the WAN Service
Configuration screen.
Figure 27 Network > WAN > Services > Add/Edit Service Type 2: IPoE
The following table describes the labels in this screen.
Table 22 Network > WAN > Services > Add/Edit Service Type 2: IPoE
LABEL DESCRIPTION
Obtain an IP
address
automatically
A static IP address is a fixed IP that your ISP gives you. A dynamic IP
address is not fixed; the ISP assigns you a different one each time you
connect to the Internet. Select this if you have a dynamic IP address.
Enable DHCP
Option 60
Select this to identify the vendor and functionality of the CellPipe 7130
RG in DHCP requests that the CellPipe 7130 RG sends to a DHCP
server when getting a WAN IP address.
Vendor Class
Identifier
Enter the Vendor Class Identifier (Option 60), such as the type of the
hardware or firmware.
Enable DHCP
Option 61
Select this to identify the CellPipe 7130 RG in DHCP requests that the
CellPipe 7130 RG sends to a DHCP server when getting a WAN IP
address.
IAID Enter the Identity Association Identifier (IAID) of the CellPipe 7130
RG. For example, the WAN connection index number.