User's Manual

CellPipe 7130 RG User’s Guide
297
CHAPTER 27
Product Specifications
The following tables summarize the CellPipe 7130 RG’s hardware and firmware
features.
27.1 Hardware Specifications
Table 100 Hardware Specifications
Dimensions 208 (W) x 178 (D) x 36 (H) mm
Weight 465 g
Power Specification 12 V 1.5 A
Power Input 100 ~ 240 VAC 50~60HZ
RESET Button Restores factory defaults
WPS Button at least 1 second: enable WPS (Wi-Fi Protected Setup)
WLAN Button at least 1 second: enable wireless LAN
Antennas One attached external dipole antenna, 2dBi
Built-in Switch Four auto-negotiating, auto MDI/MDI-X 10/100 Mbps RJ-45
Ethernet ports
DSL Port One RJ-11 connector over POTS
Giga Ethernet WAN
Port
One RJ-45 connector for GBE WAN
HomePNA Coaxial
Port
One port for HPNA v3.1 access, coax F type connector
USB Ports One USB v2.0 port for file sharing
Operation
Temperature
0º C ~ 40º C
Storage Temperature -20º ~ 60º C
Operation Humidity 20% ~ 85% RH (non-condensing)
Storage Humidity 20% ~ 90% RH (non-condensing)