Vantage RADIUS 50 User’s Guide Version 1.
Vantage RADIUS User’s Guide Copyright Copyright © 2003 by ZyXEL Communications Corporation. The contents of this publication may not be reproduced in any part or as a whole, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means, electronic, mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without the prior written permission of ZyXEL Communications Corporation. Published by ZyXEL Communications Corporation.
Vantage RADIUS User’s Guide Federal Communications Commission (FCC) Interference Statement This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operations. This equipment has been tested and found to comply with the limits for a CLASS B digital device pursuant to Part 15 of the FCC Rules.
Vantage RADIUS User’s Guide Information for Canadian Users The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operation, and safety requirements. The Industry Canada does not guarantee that the equipment will operate to a user's satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company.
Vantage RADIUS User’s Guide ZyXEL Limited Warranty ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in materials or workmanship for a period of up to two years from the date of purchase.
Vantage RADIUS User’s Guide Customer Support When you contact your customer support representative please have the following information ready: Please have the following information ready when you contact customer support. • Product model and serial number. • Warranty Information. • Date that you received your device. • Brief description of the problem and the steps you took to solve it. METHOD LOCATION WORLDWIDE SUPPORT E-MAIL SALES E-MAIL support@zyxel.com.
Vantage RADIUS User’s Guide Table of Contents Copyright......................................................................................................................................................ii Federal Communications Commission (FCC) Interference Statement................................................. iii Information for Canadian Users ...............................................................................................................iv ZyXEL Limited Warranty ...................
Vantage RADIUS User’s Guide 3.8 Basic Network Configuration .....................................................................................................3-3 3.9 DHCP Server Setup ....................................................................................................................3-5 3.10 DHCP Client List....................................................................................................................3-7 3.11 Administrator’s Account.............................
Vantage RADIUS User’s Guide 5.7 User Account............................................................................................................................ 5-11 5.8 Importing A Certificate ............................................................................................................ 5-13 5.9 Setting Up Your Access Point (AP) ......................................................................................... 5-16 Maintenance and Management...............................
Vantage RADIUS User’s Guide Appendix H IP Subnetting......................................................................................................................H-1 Appendix I Command Interpreter.......................................................................................................... I-1 Appendix J Power Adaptor Specifications .............................................................................................J-1 Appendix K Index ...........................................
Vantage RADIUS User’s Guide List of Figures Figure 1-1 Secure Wireless Connection ......................................................................................................... 1-7 Figure 2-1 Admin Account............................................................................................................................. 2-2 Figure 2-2 Admin Account MAIN MENU Screen of the Web Configurator ................................................. 2-4 Figure 3-1 IP Configuration .................
Vantage RADIUS User’s Guide Figure 5-9 ZyAIR RADIUS Settings Example.............................................................................................5-17 Figure 5-10 ZyAIR Wireless Settings Example............................................................................................5-18 Figure 6-1 System Status ................................................................................................................................6-2 Figure 6-2 F/W Upload............................
Vantage RADIUS User’s Guide List of Tables Table 2-1 Web Configurator Screens Summary ............................................................................................. 2-5 Table 3-1 Example of Network Properties for LAN Servers with Fixed IP Addresses.................................. 3-2 Table 3-2 IP Configuration............................................................................................................................. 3-4 Table 3-3 DHCP Server: Setup ........................
Vantage RADIUS User’s Guide Table 7-1 Remote Access................................................................................................................................7-8 Table 7-2 Remote Access: Add/Modify IP Address......................................................................................7-10 Table 7-3 Remote Access: Add/Modify Network IP Address .......................................................................7-11 Table 7-4 SNMP Agent.........................................
Vantage RADIUS User’s Guide List of Charts Chart A-1 Troubleshooting the Start-Up of Your Vantage RADIUS..............................................................A-1 Chart A-2 Troubleshooting the Ethernet Interface .........................................................................................A-1 Chart A-3 Troubleshooting the Password.......................................................................................................A-2 Chart A-4 Troubleshooting Telnet......................
Vantage RADIUS User’s Guide Preface About This User's Manual Congratulations on your purchase of Vantage RADIUS 50. This manual is designed to guide you through the configuration of your Vantage RADIUS for its various applications. Use the web configurator, or command interpreter interface to configure your Vantage RADIUS Server. Not all features can be configured through all interfaces. This manual may refer to Vantage RADIUS 50 as Vantage RADIUS.
Vantage RADIUS User’s Guide • • Mouse action sequences are denoted using a comma. For example, “click the Apple icon, Control Panels and then Modem” means first click the Apple icon, then point your mouse pointer to Control Panels and then click Modem. For brevity’s sake, we will use “e.g.” as a shorthand for “for instance” and “i.e for “that is” or “in other words” throughout this manual.
Getting Started Part I: Getting Started This part helps you get to know your Vantage RADIUS, introduces the web configurator and how to configure for first use.
Vantage RADIUS User’s Guide Chapter 1 Getting to Know Your Vantage RADIUS This chapter introduces the main features and applications of Vantage RADIUS. 1.1 Introducing Vantage RADIUS Vantage RADIUS (Remote Authentication Dial-In User Service) 50 (referred to in this guide as Vantage RADIUS) is a standalone RADIUS server. Vantage RADIUS maintains a list of accounts that are allowed to access a wireless network that supports IEEE 802.1x authentication.
Vantage RADIUS User’s Guide Reset Button The reset button is built into the front panel. Use this button to restore Vantage RADIUS to factory defaults. 1.2.2 Firmware All-in-one Box Vantage RADIUS consists of a private certificate authority, Remote Authentication Dial-In User Service Server, user account database and user’s connection records. It provides a secure WLAN with one “BOX” and Access Point.
Vantage RADIUS User’s Guide Dynamic DNS Support With Dynamic DNS (Domain Name System) support, you can have a static hostname alias for a dynamic IP address, allowing the host to be more easily accessible from various locations on the Internet. You must register for this service with a Dynamic DNS service provider.
Vantage RADIUS User’s Guide SSH Vantage RADIUS uses the SSH (Secure Shell) secure communication protocol to provide secure encrypted communication between two hosts over an unsecured network. HTTPS HyperText Transfer Protocol over Secure Socket Layer, or HTTP over SSL is a web protocol that encrypts and decrypts web sessions. Use HTTPS for secure web configurator access to Vantage RADIUS. Wireless Accounts Manage up to 50 connections at the same time from a possible 200 accounts.
Vantage RADIUS User’s Guide Client usernames and passwords are forwarded from a wireless network to Vantage RADIUS, which then validates them against its own list. This ensures that only individuals with valid accounts will be granted network access. Figure 1-1 Secure Wireless Connection The following gives an overview of Vantage RADIUS’ role in a network. • Wireless station A attempts to communicate with B over the wireless network via C. • C sends a “request identity” message to A for authentication.
Vantage RADIUS User’s Guide Chapter 2 Introducing the Web Configurator This chapter describes how to access the web configurator, reset your Vantage RADIUS and navigate the menu system. 2.1 Web Configurator Overview The embedded web configurator allows you to manage Vantage RADIUS from anywhere through a browser such as Microsoft Internet Explorer or Netscape Navigator. Use Internet Explorer 6.0 and later or Netscape Navigator 7.0 and later versions with JavaScript enabled.
Vantage RADIUS User’s Guide Figure 2-1 Admin Account Step 3. You should now see the web configurator MAIN MENU screen. Click the HELP icon (located in the top right corner of most screens) to view online help. Click a link under ADVANCED to configure device features. Click a link under RADIUS to enter user accounts for authentication and configure for use with your wireless access point.
Vantage RADIUS User’s Guide 2.2 Resetting Vantage RADIUS If you forget your password or cannot access the web configurator, you will need to use the RESET button on the front panel of Vantage RADIUS to reload the factory-default configuration file. This means that you will lose all configurations that you had previously and the password will be reset to “1234”. 2.2.1 Using The Reset Button Make sure the PWR LED is on (not blinking) before you begin.
Vantage RADIUS User’s Guide 2.3 Navigating the Web Configurator The following summarizes how to navigate the web configurator from the MAIN MENU screen. Navigation panel Click LOGOUT at any time to exit the web configurator. Figure 2-2 Admin Account MAIN MENU Screen of the Web Configurator 2.3.1 Navigation Panel After you enter the password, use the sub-menus on the navigation panel to configure Vantage RADIUS features. The following table describes the sub-menus.
Vantage RADIUS User’s Guide Table 2-1 Web Configurator Screens Summary LINK ADVANCED TAB FUNCTION IP Use this screen to configure basic network configuration on Vantage RADIUS. DHCP SERVER Use this screen to configure the DHCP Server.. Select the DHCP Client List tab to display a list of all network clients using the DHCP server RADIUS ADMIN ACCOUNT Use this screen to change your system password and username. TIME Use this screen to change the time and date of your Vantage RADIUS.
Vantage RADIUS User’s Guide Table 2-1 Web Configurator Screens Summary LINK TAB USER TRACE LOGOUT 2-6 FUNCTION Use these screens to monitor client access and generate log files. Click this label to exit the web configurator.
Vantage RADIUS User’s Guide Chapter 3 Advanced Settings This chapter provides information on the advanced settings screens. 3.1 Advanced Settings Overview The advanced settings screens allow you to configure your Vantage RADIUS for first use, including setting up Internet access for your wireless network, DHCP server settings, managing web configurator access, time server settings and configuring the types of log services available. 3.
Vantage RADIUS User’s Guide The subnet mask specifies the network number portion of an IP address. This field must be configured manually; the default setting is 255.255.255.0. Unless you are implementing sub-netting, there is no need to change this field. 3.3 DNS Server Address Assignment Use DNS (Domain Name System) to map a domain name to its corresponding IP address and vice versa, for instance, the IP address of www.zyxel.com is 204.217.0.2.
Vantage RADIUS User’s Guide the clients. If DHCP service is disabled, you must have another DHCP server on your LAN, or else the computer must be manually configured. 3.6 IP Pool Setup The IP pool specifies the number of consecutive IP addresses to reserve for computers on your network, starting from a specified IP address. Vantage RADIUS supports a pool size of up to 253 IP addresses. It is recommended that you assign IP addresses starting from the higher end of your subnet address. For example, 192.
Vantage RADIUS User’s Guide Figure 3-1 IP Configuration The following table describes the labels in this screen. Table 3-2 IP Configuration LABEL DESCRIPTION Basic Network Configuration IP Address Type an IP address in dotted decimal notation. Netmask Type the IP subnet mask of the RADIUS server (if your ISP gave you one) in this field. Gateway Type the IP address of the gateway device used to connect your RADIUS to the Internet.
Vantage RADIUS User’s Guide Table 3-2 IP Configuration LABEL DESCRIPTION MAC Address This field displays the physical address of your RADIUS server on the network. Apply Click Apply to save your changes back to the RADIUS. 3.9 DHCP Server Setup Vantage RADIUS dynamically assigns IP addresses to clients. Click ADVANCED and then DHCP SERVER in the main menu to configure your Vantage RADIUS as a DHCP server. Figure 3-2 DHCP Server: Setup The following table describes the labels in this screen.
Vantage RADIUS User’s Guide Table 3-3 DHCP Server: Setup LABEL DESCRIPTION Set Up DHCP Server Enable/Disable DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients (workstations) to obtain TCP/IP configuration at startup from a server. Disable this field to stop the RADIUS acting as a DHCP server. When configured as a server, the RADIUS provides TCP/IP configuration for the clients.
Vantage RADIUS User’s Guide 3.10 DHCP Client List Click ADVANCED in the main menu and then DHCP SERVER. Now click the DHCP Client List tab. The read-only information here relates to your DHCP status. The DHCP Client List shows current DHCP client information (including IP Address and MAC Address) of all network clients using the DHCP server. Figure 3-3 DHCP Server: Client List The following table describes the labels in this screen.
Vantage RADIUS User’s Guide 3.11 Administrator’s Account To change your RADIUS system password (recommended) click ADVANCED and then ADMIN ACCOUNT from the main menu. This screen allows you to change the administrator account name and password. Figure 3-4 Administrator Account The following table describes the labels in this screen.
Vantage RADIUS User’s Guide 3.12 Time Settings Vantage RADIUS uses a system clock to synchronize time across the network and generates accurate log files. Time can be obtained from the connecting computer, or an NTP (Network Time Protocol) Server. To change your time settings, click ADVANCED in the main menu, and then click TIME. Figure 3-5 Time Settings The following table describes the labels in this screen.
Vantage RADIUS User’s Guide Table 3-6 Time Settings LABEL DESCRIPTION Current Time Year/Month/Day This field displays the date of your RADIUS. Each time you reload this page, the RADIUS synchronizes the time with the time server. Hour: Minute: Second This field displays the time of your RADIUS. Each time you reload this page, the RADIUS synchronizes the time with the time server.
Vantage RADIUS User’s Guide Table 3-6 Time Settings LABEL DESCRIPTION Daylight Saving Time Select this option if you use daylight savings time. Daylight saving is a period from late spring to early fall when many countries set their clocks ahead of normal local time by one hour to give more daytime light in the evening. From Date Enter the month and day that your daylight-savings time starts on if you selected Daylight Saving Time.
Vantage RADIUS User’s Guide Chapter 4 System Logs This chapter details the various logs generated by Vantage RADIUS and their role in your network. 4.1 Logs Overview Vantage RADIUS generates log files that can be sent via e-mail or to a syslog server (see section 4.3) for troubleshooting, maintenance, monitoring clients’ activities, statistics and collecting information about internal events and network traffic that are otherwise hidden from view.
Vantage RADIUS User’s Guide 4.2 TFTP Server Trivial File Transfer Protocol (TFTP) is an Internet file transfer protocol similar to FTP, but uses the UDP (User Datagram Protocol) rather than TCP (Transmission Control Protocol). UDP is faster than TCP and more portable. The advantage is very fast transfer times that allows a server to perform real-time logging. 4.3 Syslog server Syslog servers listen for incoming syslog messages and decodes them for logging purposes.
Vantage RADIUS User’s Guide Figure 4-1 Syslog Application To avoid confusion about which log came from which Vantage RADIUS, you should configure each Vantage RADIUS on the network to send its log files to different log stores inside the syslog server. 4.4 System Log Messages There are nine cases when a system log message is generated. The table below outlines the messages logged by Vantage RADIUS and the meaning of the log.
Vantage RADIUS User’s Guide Table 4-2 System Logs MESSAGE MEANING Admin login Http OK/Fail : user = admin source IP Someone has logged in to the web configurator using the administrator account via an HTTP connection. Admin login https OK/Fail : user = admin source IP Someone has logged in to the web configurator using the administrator account via a telnet connection over a secured (HTTPS) connection.
Vantage RADIUS User’s Guide Figure 4-2 Example Of RADIUS Log Messages 4.5.1 Types of RADIUS Messages The following types of RADIUS messages are exchanged between the access point and Vantage RADIUS for user authentication: • Access-Request Sent by an access point, requesting authentication. • Access-Reject Sent by Vantage RADIUS rejecting access. • Access-Accept Sent by Vantage RADIUS allowing access.
Vantage RADIUS User’s Guide • Access-Challenge Sent by Vantage RADIUS requesting more information in order to allow access. The access point sends a proper response from the user and then sends another Access-Request message. The following types of RADIUS messages are exchanged between the access point and Vantage RADIUS for user accounting: • Accounting-Request Sent by the access point requesting accounting.
Vantage RADIUS User’s Guide This field displays the account This field displays the name of the name of the wireless client wireless AP used by the wireless client to connected to the network. connect to the network. These fields refer to the total number of packets transmitted (Output Packet) and received (Input Packet) by the wireless client. This number is based on the accounting request sent by AP. See your wireless AP’s User’s Guide for how to set up accounting.
Vantage RADIUS User’s Guide Figure 4-4 SYSTEM LOG: Real Time System Logs The following table describes the labels in this screen. Table 4-3 SYSTEM LOG: Real Time System Logs LABEL DESCRIPTION System Log List Clear Log Click this button to remove all log entries from the System Log List. Refresh Click this button to update the System Log List with the most recent recordable events. Email Log Now Click Email Log Now to send logs to the e-mail address specified in the Log Settings screen.
Vantage RADIUS User’s Guide Table 4-3 SYSTEM LOG: Real Time System Logs LABEL DESCRIPTION TFTP Log Now Click this button to send the current log to the TFTP server specified in the Log Settings screen. Make sure that you have first filled in the Send Every Real Time Event to Syslog server fields in the Log Settings screen, see section 4.13. No. This field displays the message index in the order of arrival. Time This field displays the time and date the packet was logged.
Vantage RADIUS User’s Guide Table 4-4 SYSTEM LOG: Log Files LABEL DESCRIPTION No. This field displays the index of the log file. Date This field displays the date and time the last log file was added. File Name (View and Download) Click this link to download the .txt log file from the TFTP server. The file is in ASCII format and can be read by any text editor. 4.
Vantage RADIUS User’s Guide Table 4-5 RADIUS LOG: Real Time RADIUS Logs LABEL DESCRIPTION RADIUS Log List Clear Log Click this button to remove all entries Refresh Click this button to update the log entries Email Log Now Click Email Log Now to send logs to the e-mail address specified in the Log Settings screen. Make sure that you have first filled in the Send log file to mail server fields in Log Settings screen, see section 4.13.
Vantage RADIUS User’s Guide The following table describes the labels in this screen. Table 4-6 RADIUS LOG: Log Files LABEL DESCRIPTION Log File List No. This field displays the index of the log file. Date This field displays the date and time the last log file was added. File Name (View and Download) Click this link to download the .txt log file from the TFTP server. The file is in ASCII format and can be read by any text editor. 4.
Vantage RADIUS User’s Guide The following table describes the labels in this screen. Table 4-7 USER TRACE: Real Time User Trace LABEL DESCRIPTION System Log List Clear Log Click this button to remove all entries Refresh Click this button to update the log entries Email Log Now Click Email Log Now to send the logs to the e-mail address specified in the Log Settings screen. Make sure that you have first filled in the Send log file to mail server fields in Log Settings screen, see section 4.13.
Vantage RADIUS User’s Guide Figure 4-9 User Trace: Log Files The following table describes the labels in this screen. Table 4-8 RADIUS Logs: Log Files LABEL DESCRIPTION Log File List No. This field displays the index of the log file. Date This field displays the date and time the log file was created. Note that there can only be one log file per day. If a new log file is generated, it appends the old one and changes the time to reflect the time updated.
Vantage RADIUS User’s Guide Figure 4-10 RADIUS Logs: Log Files The following table describes the labels in this screen. Table 4-9 RADIUS Logs: Log Files LABEL DESCRIPTION Send every real time event to syslog server Send every real time event to syslog server Enable this field to have Vantage RADIUS log every system, RADIUS and user events to a syslog server. Type the syslog server IP address or domain name.
Vantage RADIUS User’s Guide Table 4-9 RADIUS Logs: Log Files LABEL DESCRIPTION Radius Log Enable this field to record messages passed between your Vantage RADIUS and the wireless AP’s accessing it to the syslog server, see section 4.5. User Trace Enable this field to record wireless clients’ activities on the network to the syslog server, see section 4.6.
Vantage RADIUS User’s Guide Table 4-9 RADIUS Logs: Log Files LABEL DESCRIPTION Mail Address3 Type a third e-mail address if you want your log files to be sent to a third destination. System Log Enable this field to record system events for logging to the above e-mail addresses, see section 4.4. Radius Log Enable this field to record messages passed between your Vantage RADIUS and the wireless AP’s accessing it to the above e-mail addresses, see section 4.5.
RADIUS Server Part II: RADIUS Server This part introduces the RADIUS Server screens.
Vantage RADIUS Server User’s Guide Chapter 5 RADIUS Configuration 5.1 802.1x Overview The IEEE 802.1x standard outlines enhanced security methods for both the authentication of wireless stations and encryption key management. Vantage RADIUS provides authentication for wireless access points. 5.2 Introduction to RADIUS RADIUS is based on a client-sever model that supports authentication and accounting, where access point is the client and the server is the RADIUS server.
Vantage RADIUS Server User’s Guide network. In addition to the shared key, password information exchanged is also encrypted to protect the wired network from unauthorized access. 5.3.1 EAP Authentication Overview EAP (Extensible Authentication Protocol) is an authentication protocol that runs on top of the IEEE802.1x transport mechanism in order to support multiple types of user authentication.
Vantage RADIUS Server User’s Guide MD5 authentication does not use certificates for authentication. If your wireless clients are not going to use other protocols for authentication, you do not need to configure any certificates. The Vantage RADIUS can use certificates (also called digital IDs) to authenticate users. Certificates are based on public-private key pairs. A certificate contains the certificate owner’s identity and public key.
Vantage RADIUS Server User’s Guide 5.4 Trusted Root CA If your wireless clients use MD5 authentication protocol, you do not need to configure any certificates. Otherwise click RADIUS in the main menu and then click ROOT CA to set up a certificate for use with PEAP authentication. All the fields in this screen are required for the trusted Root CA. Click this hyperlink to download the Root CA certificate to your computer.
Vantage RADIUS Server User’s Guide Table 5-1 Trusted Root Certificate LABEL DESCRIPTION State Type up to 30 ASCII characters to identify your state, district or region. Locality Type up to 50 ASCII characters to identify the city or town where your organization’s office is located. Organization Type up to 50 ASCII characters to identify your organizations name. Department Type up to 50 ASCII characters to detail the department that is issuing the certificate.
Vantage RADIUS Server User’s Guide All the fields in this screen are required for the server certificate. Figure 5-3 Server Certificate The following table describes the labels in this screen. Table 5-2 Server Certificate LABEL DESCRIPTION Common Name Type up to 50 ASCII characters (not including spaces) to identify this certificate. Country Type two characters to identify the nation where the certificate owner is located.
Vantage RADIUS Server User’s Guide 5.6 RADIUS Server Click RADIUS and then RADIUS SERVER in the main menu to set up your Vantage RADIUS to manage connections with wireless APs. The port settings are set by default. Wireless APs are required to use the same port settings. Type the shared secret used to connect to your wireless AP. The wireless APs use the same shared secret.
Vantage RADIUS Server User’s Guide Accounting Port Enter the port number of the accounting server. The default port number is 1813. Make sure your wireless AP uses the same port number. Allowed Access Type Allow Any IP Address Shared Secret Enable this field to have Vantage RADIUS accept connections from all incoming IP addresses using the shared secret below. Type a password as the key to be shared. The key must be the same on Vantage RADIUS and your wireless AP. The key is not sent over the network.
Vantage RADIUS Server User’s Guide Description Click the button in this field to edit the information required to access your wireless AP. Action Select the check box next to the AP(s) description in this list that you want to delete, then click Delete to remove this entry. Delete Click this button to add an IP address of a wireless AP to the Allowed IP Address list. 5.6.1 Insert/Modify Allowed IP addresses This screen allows you to specify which AP is allowed to communicate with Vantage RADIUS.
Vantage RADIUS Server User’s Guide Description Type a description for identification purposes of your wireless AP in the Allowed IP Address list. Apply Click this button to save changes back to Vantage RADIUS and return to the RADIUS SERVER screen. 5.6.2 Insert/Modify Allowed Network Range This screen allows you to specify a network range in which an AP is allowed to communicate with Vantage RADIUS.
Vantage RADIUS Server User’s Guide Table 5-5 RADIUS Add New Network Address LABEL DESCRIPTION Allowed Network Address Network Address Type the first address in your network. This is the start address from which Vantage RADIUS uses the Netmask to allow access from many APs. Netmask This field displays subnet mask used to specify the network range limits for accepted IP addresses. Shared Secret Type a password as the key to be shared.
Vantage RADIUS Server User’s Guide Table 5-6 User Account LABEL DESCRIPTION User Account List The maximum number of configurable accounts is 200. Vantage RADIUS allows up to 50 connections at the same time. Duplicate usernames and passwords are allowed. Add New User Click this button to add a new user account. No. This is the index number of a user account. User Name The field displays the account user name. Action Change Password Click this button to modify user’s password.
Vantage RADIUS Server User’s Guide The following table describes the labels in this screen. Table 5-7 User Account: Add New User LABEL DESCRIPTION User Name Type the wireless client’s username. The username can consist of up to 80 alphanumeric characters and is case sensitive. Enter Password Type the password corresponding to the name above. The password can consist of up to 80 alphanumeric characters and is case sensitive. Confirm Password Type the password again for confirmation.
Vantage RADIUS Server User’s Guide Step 2. Click Install Certificate to open the Certificate Import Wizard as shown below. Then click Next. .
Vantage RADIUS Server User’s Guide Step 3. Click Automatically select the certificate store based on the type of certificate, or if you prefer, specify the location for the certificate to be stored, then click Next. Step 4. Click Yes to add this certificate to your computer. The Certificate Import Wizard dialog box appears as below.
Vantage RADIUS Server User’s Guide Step 5. 5.9 Click OK to complete the installation. Setting Up Your Access Point (AP) This section assumes knowledge of how to configure a management session on your AP. The following examples use screenshots from ZyXEL’s ZyAIR G-3000. Actual screens and products differ from the ones displayed. Please consult your AP’s User’s Guide before making the changes below.
Vantage RADIUS Server User’s Guide 1. Enable these fields to activate authentication and accounting services. 3. Type the port number of the RADIUS server. The 2. Enter the IP default port numbers are address of the shown. RADIUS server You need not change in dotted decimal these values unless you notation. change them in the Vantage RADIUS. 4. Type a shared secret (password) to secure communication between the AP and Vantage RADIUS. Figure 5-9 ZyAIR RADIUS Settings Example 5.9.
Vantage RADIUS Server User’s Guide The authentication database contains wireless station login information. Vantage RADIUS is an external authentication server. Use this drop-down list box to select the order the wireless AP checks the databases to authenticate a wireless station. 1. Select Authentication Required so that all wireless stations have to enter usernames and passwords before access to the wired network is allowed. 2.
Maintenance and Management Part III: Maintenance and Management This part explains how to maintain and manage your Vantage RADIUS.
Vantage RADIUS User’s Guide Chapter 6 Maintenance This chapter covers system maintenance screens 6.1 Overview The maintenance screens can help you view system information, upload new firmware and manage your configuration. 6.2 System Status This screen displays details about the Vantage RADIUS firmware, time running since last startup, and a list of wireless clients authenticated and currently connected to the network.
Vantage RADIUS User’s Guide Figure 6-1 System Status The following table describes the labels in this screen. Table 6-1 System Status LABEL DESCRIPTION System Status Boot Rom This field displays the Boot Rom’s version number. Firmware This field displays the firmware version number. System Up Time This field displays the length of time since Vantage RADIUS server was last started. Current Users This table lists the wireless clients currently using the network.
Vantage RADIUS User’s Guide Table 6-1 System Status LABEL DESCRIPTION NAS ID This field displays the wireless client’s IP address. NAS IP Address This field displays the IP address of the wireless AP that the wireless client uses to access the network. Login Time This field displays the length of time the wireless client is connected for. 6.3 Firmware Upload Find the latest firmware at www.ZyXEL.com in a file that uses the system model name with a "*.bin" extension, e.g., "Vantage.bin".
Vantage RADIUS User’s Guide Figure 6-3 F/W Upload LABEL DESCRIPTION Update firmware from local file. Local PC File Path Type in the location of the file you want to upload in this field or click Browse to find it. Browse... Click this button to find the .bin file you want to upload. Remember that you must decompress compressed (.zip) files before you can upload them. Apply Click this button to begin the upload process. This process may take up to two minutes. Update firmware from TFTP server.
Vantage RADIUS User’s Guide 6.4 Configuration Click MAINTENANCE, and then the Configuration tab. Use this screen to backup or restore Vantage RADIUS configuration. Figure 6-5 Configuration Backup 6.4.1 Configuration Backup Configuration Backup allows you to backup (save) the current system (Vantage RADIUS) configuration to your computer or a TFTP server. Backup is highly recommended once your Vantage RADIUS is functioning properly.
Vantage RADIUS User’s Guide Table 6-2 Configuration Backup LABEL DESCRIPTION Remote TFTP Server Type the IP address of the TFTP server. File Name Type the filename of the file to backup. Apply Click this button to begin the backup process. 6.4.2 Configuration Restore Restore Configuration allows you to restore a previously saved configuration file from your computer to your Vantage RADIUS.
Vantage RADIUS User’s Guide Figure 6-6 Network Temporarily Disconnected If you uploaded the default configuration file you may need to change the IP address of your computer to be in the same subnet as that of the default device IP address (192.168.1.3). See your Quick Start Guide or the Appendices for details on how to set up your computer’s IP address.
Vantage RADIUS User’s Guide Chapter 7 Management This chapter details how to configure your Vantage RADIUS for remote access 7.1 Remote Management Overview Remote management allows you to determine which services/protocols can access which Vantage RADIUS interface (if any) from which computers. To disable remote management of a service, select Disable in the corresponding field. You may only have one remote management session running at a time.
Vantage RADIUS User’s Guide 7.1.2 System Timeout There is a system timeout of five minutes (three hundred seconds) for either the console port or telnet/web/FTP connections. Your Vantage RADIUS automatically logs you out if you do nothing in this timeout period. See the REMOTE ACCESS screen to change the timeout period in the Idle Time Out field. 7.
Vantage RADIUS User’s Guide Figure 7-1 HTTPS Implementation If you disable HTTP (Disable) in the REMOTE ACCESS screen, then Vantage RADIUS blocks all HTTP connection attempts. 7.3 SSH Unlike Telnet, which transmit data in clear text, SSH (Secure Shell) is a secure communication protocol that combines authentication and data encryption to provide secure encrypted communication between two hosts over an unsecured network.
Vantage RADIUS User’s Guide 7.3.1 How SSH works The following table summarizes how a secure connection is established between two remote hosts. 1. Host Identification The SSH client sends a connection request to the SSH server. The server identifies itself with a host key. The client encrypts a randomly generated session key with the host key and server key and sends the result back to the server. The client automatically saves any new server public keys.
Vantage RADIUS User’s Guide 7.4.1 Example 1: Microsoft Windows This section describes how to access Vantage RADIUS using the Secure Shell Client program. Step 1. Launch the SSH client and specify the connection information (IP address, port number or device name) for Vantage RADIUS. Step 2. Configure the SSH client to accept connection using SSH version 1. Step 3. A window displays prompting you to store the host key in you computer. Click Yes to continue.
Vantage RADIUS User’s Guide A message displays indicating the SSH protocol version supported by Vantage RADIUS. $ telnet 192.168.1.1 22 Trying 192.168.1.1... Connected to 192.168.1.1. Escape character is '^]'. SSH-1.5-1.0.0 Figure 7-5 SSH Example 2: Test Step 3. Enter “ssh –2 192.168.1.3”. This command forces your computer to connect to Vantage RADIUS using SSH version 1.
Vantage RADIUS User’s Guide Figure 7-7 Telnet Configuration on a TCP/IP Network 7.6 Remote Access To configure your Vantage RADIUS for remote access, click MANAGEMENT in the main menu, and then click REMOTE ACCESS.
Vantage RADIUS User’s Guide Figure 7-8 Remote Access Table 7-1 Remote Access LABEL DESCRIPTION Allowed Access Type Allow Any IP Address Enable this field to have Vantage RADIUS accept connections from all incoming IP addresses. Allow Specified IP Address / Network Address Enable this field to have Vantage RADIUS restricts access to the list of network addresses and IP addresses in the Allow IP Address and Allowed Network Address lists.
Vantage RADIUS User’s Guide Table 7-1 Remote Access LABEL SSH DESCRIPTION SSH (Secure Shell) is a secure communication protocol that combines authentication and data encryption to provide secure encrypted communication between two hosts over an unsecured network. Enable this field to allow SSH access to the Vantage RADIUS.
Vantage RADIUS User’s Guide Table 7-1 Remote Access LABEL DESCRIPTION No. This field displays the index number. Network IP Address This field displays the network address in which a client is allowed to use the services to manage Vantage RADIUS. Netmask This field displays the subnet mask used to specify the network range limits for accepted IP addresses. Action Click the Modify button in this field to edit the IP address for this entry.
Vantage RADIUS User’s Guide Table 7-2 Remote Access: Add/Modify IP Address LABEL Apply DESCRIPTION Click this button to save changes back to Vantage RADIUS and return to the REMOTE ACCESS screen. 7.6.2 Insert/Modify Allowed Network IP Address In the REMOTE ACCESS screen, click Add to insert a new entry in the Allowed Network IP Address list,. To edit an existing entry, click the Modify button next to a Network IP address you want to change.
Vantage RADIUS User’s Guide 7.7 SNMP Simple Network Management Protocol (SNMP) is a protocol used for exchanging management information between network devices. SNMP is a member of the TCP/IP protocol suite. Your Vantage RADIUS supports SNMP agent functionality, which allows a manager station to manage and monitor Vantage RADIUS through the network. Vantage RADIUS supports SNMP version one (SNMPv1). The next figure illustrates an SNMP management operation. SNMP is only available if TCP/IP is configured.
Vantage RADIUS User’s Guide An agent is a management software module that resides in a managed device (Vantage RADIUS). An agent translates the local management information from the managed device into a form compatible with SNMP. The manager is the console through which network administrators perform network management functions. It executes applications that control and monitor managed devices.
Vantage RADIUS User’s Guide Configuring SNMP1 7.8 To configure your SNMP settings, click MAINTENANCE in the main menu, and then click SNMP AGENT. Figure 7-12 SNMP Agent Table 7-4 SNMP Agent LABEL DESCRIPTION SNMP Agent Setup 1 Enable Click this radio button to allow SNMP access to Vantage RADIUS. Disable Click this radio button to have Vantage RADIUS ignore SNMP requests. At the time of writing, SNMP only has write access to the IP screen in the ADVANCED menu.
Vantage RADIUS User’s Guide Table 7-4 SNMP Agent LABEL DESCRIPTION SNMP Port You may change the server port number for a service if needed, however you must use the same port number in order to use that service for remote management. Trap Port You may change the server port number for a service if needed, however you must use the same port number in order to use that service for remote management. Allowed Community IP Address Add Click this button to insert a new trusted IP address to this list. No.
Vantage RADIUS User’s Guide 7.8.1 Insert/Modify Allowed IP Address In the SNMP AGENT screen, click Add to insert a new entry in the Allowed IP Address list. To edit an existing entry, click the Modify button next to an IP address you want to change. Figure 7-13 SNMP: Allowed IP Address Table 7-5 SNMP: Allowed IP Address LABEL DESCRIPTION Allowed Network Address Community Type the community, which is the password sent with each request to the SNMP manager. The default is public and allows all requests.
Vantage RADIUS User’s Guide Figure 7-14 SNMP: Allowed Network Address Table 7-6 SNMP: Allowed Network Address LABEL DESCRIPTION Allowed Network Address Community Type the community, which is the password sent with each request to the SNMP manager. The default is public and allows all requests. Network Address Type the first address in your network. This is the start address from which Vantage RADIUS uses the Netmask to allow access to many clients.
Appendices Part IV: APPENDICES This part provides troubleshooting and background information about setting up your computer’s IP address, wireless LAN, 802.1x and IP subnetting. It also provides information on the command interpreter interface.
Vantage RADIUS User’s Guide Appendix A Troubleshooting This appendix covers potential problems and possible remedies. After each problem description, some instructions are provided to help you to diagnose and to solve the problem. Problems Starting Up Vantage RADIUS Chart A-1 Troubleshooting the Start-Up of Your Vantage RADIUS PROBLEM CORRECTIVE ACTION None of the LEDs turn on when I plug in the power adaptor.
Vantage RADIUS User’s Guide Chart A-2 Troubleshooting the Ethernet Interface PROBLEM I cannot ping any computer on the LAN. CORRECTIVE ACTION If the ETHERNET LED on the front panel is off, check the Ethernet cable connections between your Vantage RADIUS and the Ethernet device. Check the Ethernet cable connections between the Ethernet device and the LAN computers. Check for faulty Ethernet cables. Make sure the LAN computer’s Ethernet adapter is installed and working properly.
Vantage RADIUS User’s Guide Problems with Telnet Chart A-4 Troubleshooting Telnet PROBLEM CORRECTIVE ACTION I cannot access Vantage RADIUS through Telnet. Refer to the Problems with the Ethernet Interface section for instructions on checking your Ethernet connection. Check that telnet is enabled in the REMOTE MANAGEMENT screen.
Vantage RADIUS User’s Guide Appendix B Specifications Hardware Chart B-1 HARDWARE SPECIFICATIONS Power Specification DC 5V 3Amp Max. Operation Temperature 0º C ~ 50º C Storage Temperature -10º C ~ 60º C Operation Humidity 10% to 90% (Non-condensing) Storage Humidity 5% to 95% (Non-condensing) Firmware CHART B-2 FIRMWARE SPECIFICATIONS Standards IEEE802.3u 100BASE-TX. IEEE 802.3 and 802.3u 10Base-T and 100Base-TX. IEEE 802.1x security standard. IEEE 802.3af draft.
Vantage RADIUS User’s Guide CHART B-2 FIRMWARE SPECIFICATIONS Diagnostics Capabilities The access point can perform self-diagnostic tests. These tests check the integrity of the following circuits: FLASH memory. DRAM. Dual Ethernet port. Syslog. RADIUS log User Trace log. Management Embedded Web Configurator management. Command-line interface. Telnet support; Password-protected telnet access to internal configuration manager. TFTP/Web for firmware downloading, configuration backup and restoration.
Vantage RADIUS User’s Guide Appendix C Power over Ethernet Specifications You can use a power over Ethernet injector to power this device. The injector must comply to IEEE 802.3af. Chart C-1 Power over Ethernet Injector Specifications Power Output 15.
Vantage RADIUS User’s Guide Appendix D Setting up Your Computer’s IP Address This appendix is a general guide on how to set an IP address on your computer or have it receive an IP address automatically if the device you are connecting it to can assign it an IP address. All computers must have a 10M or 100M Ethernet adapter card and TCP/IP installed.
Vantage RADIUS User’s Guide Click Start, Settings, Control Panel and double-click the Network icon to open the Network window. The Network window Configuration tab displays a list of installed components. You need a network adapter, the TCP/IP protocol and Client for Microsoft Networks. If you need the adapter: a. In the Network window, click Add. b. Select Adapter and then click Add. c. Select the manufacturer and model of your network adapter and then click OK. If you need TCP/IP: a.
Vantage RADIUS User’s Guide c. Select Microsoft from the list of manufacturers. d. Select Client for Microsoft Networks from the list of network clients and then click OK. e. Restart your computer so the changes you made take effect. In the Network window Configuration tab, select your network adapter's TCP/IP entry and click Properties. 1. Click the IP Address tab. -If your IP address is dynamic, select Obtain an IP address automatically.
Vantage RADIUS User’s Guide 2. Click the DNS Configuration tab. -If you do not know your DNS information, select Disable DNS. -If you know your DNS information, select Enable DNS and type the information in the fields below (you may not need to fill them all in). 3. Click the Gateway tab. -If you do not know your gateway’s IP address, remove previously installed gateways.
Vantage RADIUS User’s Guide remove previously installed gateways. -If you have a gateway IP address, type it in the New gateway field and click Add. 4. Click OK to save and close the TCP/IP Properties window. 5. Click OK to close the Network window. Insert the Windows CD if prompted. 6. Turn on your Vantage RADIUS and restart your computer when prompted. Verifying Your Computer’s IP Address 1. Click Start and then Run. 2.
Vantage RADIUS User’s Guide 1. For Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings, Control Panel. 2. For Windows XP, click Network Connections. For Windows 2000/NT, click Network and Dial-up Connections. D-6 3. Right-click Local Area Connection and then click Properties.
Vantage RADIUS User’s Guide 4. Select Internet Protocol (TCP/IP) (under the General tab in Win XP) and click Properties.
Vantage RADIUS User’s Guide 5. The Internet Protocol TCP/IP Properties window opens (the General tab in Windows XP). -If you have a dynamic IP address click Obtain an IP address automatically. -If you have a static IP address click Use the following IP Address and fill in the IP address, Subnet mask, and Default gateway fields. Click Advanced. 6. -If you do not know your gateway's IP address, remove any previously installed gateways in the IP Settings tab and click OK.
Vantage RADIUS User’s Guide -Click Add. -Repeat the previous three steps for each default gateway you want to add. -Click OK when finished. 7. In the Internet Protocol TCP/IP Properties window (the General tab in Windows XP): -Click Obtain DNS server address automatically if you do not know your DNS server IP address(es). -If you know your DNS server IP address(es), click Use the following DNS server addresses, and type them in the Preferred DNS server and Alternate DNS server fields.
Vantage RADIUS User’s Guide 1. D-10 Click the Apple menu, Control Panel and double-click TCP/IP to open the TCP/IP Control Panel.
Vantage RADIUS User’s Guide 2. Select Ethernet built-in from the Connect via list. 3. For dynamically assigned settings, select Using DHCP Server from the Configure: list. 4. For statically assigned settings, do the following: -From the Configure box, select Manually. -Type your IP address in the IP Address box. -Type your subnet mask in the Subnet mask box. -Type the IP address of your Vantage RADIUS in the Router address box. 5. Close the TCP/IP Control Panel. 6.
Vantage RADIUS User’s Guide 1. Click the Apple menu, and click System Preferences to open the System Preferences window. 2. Click Network in the icon bar. - Select Automatic from the Location list. - Select Built-in Ethernet from the Show list. - Click the TCP/IP tab. 3. For dynamically assigned settings, select Using DHCP from the Configure list. 4. For statically assigned settings, do the following: -From the Configure box, select Manually. -Type your IP address in the IP Address box.
Vantage RADIUS User’s Guide Appendix E Wireless LAN and IEEE 802.11 A wireless LAN (WLAN) provides a flexible data communications system that you can use to access various services (navigating the Internet, email, printer services, etc.) without the use of a cabled connection. In effect a wireless LAN environment provides you the freedom to stay connected to the network while roaming around in the coverage area. WLAN is not available on all models.
Vantage RADIUS User’s Guide standard was developed to maximize interoperability between differing brands of wireless LANs as well as to introduce a variety of performance improvements and benefits. The IEEE 802.11 specifies three different transmission methods for the PHY, the layer responsible for transferring data between nodes. Two of the methods use spread spectrum RF signals, Direct Sequence Spread Spectrum (DSSS) and Frequency-Hopping Spread Spectrum (FHSS), in the 2.4 to 2.
Vantage RADIUS User’s Guide Diagram E-1 Peer-to-Peer Communication in an Ad-hoc Network Infrastructure Wireless LAN Configuration For infrastructure WLANs, multiple access points (APs) link the WLAN to the wired network and allow users to efficiently share network resources. The access points not only provide communication with the wired network but also mediate wireless network traffic in the immediate neighborhood. Multiple access points can provide wireless coverage for an entire building or campus.
Vantage RADIUS User’s Guide Diagram E-2 ESS Provides Campus-Wide Coverage E-4 Wireless LAN and IEEE 802.
Vantage RADIUS User’s Guide Appendix F Wireless LAN With IEEE 802.1x As wireless networks become popular for both portable computing and corporate networks, security is now a priority. Security Flaws with IEEE 802.11 Wireless networks based on the original IEEE 802.11 have a poor reputation for safety. The IEEE 802.11b wireless access standard, first published in 1999, was based on the MAC address. As the MAC address is sent across the wireless link in clear text, it is easy to spoof and fake.
Vantage RADIUS User’s Guide • Support for RADIUS (Remote Authentication Dial In User Service, RFC 2138, 2139) for centralized user profile and accounting management on a network RADIUS server. • Support for EAP (Extensible Authentication Protocol, RFC 2486) that allows additional authentication methods to be deployed with no changes to the access point or the wireless stations.
Vantage RADIUS User’s Guide Appendix G Types of EAP Authentication This appendix discusses the five popular EAP authentication types: EAP-MD5, EAP-TLS, EAPTTLS, PEAP and LEAP. The type of authentication you use depends on the RADIUS server. Consult your network administrator for more information. EAP-MD5 (Message-Digest Algorithm 5) MD5 authentication is the simplest one-way authentication method. The authentication server sends a challenge to the wireless station.
Vantage RADIUS User’s Guide PEAP (Protected EAP) Like EAP-TTLS, server-side certificate authentication is used to establish a secure connection, then use simple username and password methods through the secured connection to authenticate the clients, thus hiding client identity. However, PEAP only supports EAP methods, such as EAP-MD5, EAP-MSCHAPv2 and EAP-GTC (EAP-Generic Token Card), for client authentication. EAP-GTC is implemented only by Cisco.
Vantage RADIUS User’s Guide Appendix H IP Subnetting IP Addressing Routers “route” based on the network number. The router that delivers the data packet to the correct destination host uses the host ID. IP Classes An IP address is made up of four octets (eight bits), written in dotted decimal notation, for example, 192.168.1.1. IP addresses are categorized into different classes. The class of an address depends on the value of its first octet. Class “A” addresses have a 0 in the left most bit.
Vantage RADIUS User’s Guide A class “C” network (8 host bits) can have 28 –2 or 254 hosts. A class “B” address (16 host bits) can have 216 –2 or 65534 hosts. A class “A” address (24 host bits) can have 224 –2 hosts (approximately 16 million hosts). Since the first octet of a class “A” IP address must contain a “0”, the first octet of a class “A” address can have a value of 0 to 127.
Vantage RADIUS User’s Guide Subnetting With subnetting, the class arrangement of an IP address is ignored. For example, a class C address no longer has to have 24 bits of network number and 8 bits of host ID. With subnetting, some of the host ID bits are converted into network number bits. By convention, subnet masks always consist of a continuous sequence of ones beginning from the left most bit of the mask, followed by a continuous sequence of zeros, for a total number of 32 bits.
Vantage RADIUS User’s Guide Subnet Mask 255.255.255. 0 Subnet Mask (Binary) 11111111.11111111.11111111. 00000000 The first three octets of the address make up the network number (class “C”). You want to have two separate networks. Divide the network 192.168.1.0 into two separate subnets by converting one of the host ID bits of the IP address to a network number bit. The “borrowed” host ID bit can be either “0” or “1” thus giving two subnets; 192.168.1.0 with mask 255.255.255.128 and 192.168.1.
Vantage RADIUS User’s Guide Subnet Mask (Binary) 11111111.11111111.11111111. 10000000 Subnet Address: 192.168.1.128 Lowest Host ID: 192.168.1.129 Broadcast Address: 192.168.1.255 Highest Host ID: 192.168.1.254 The remaining 7 bits determine the number of hosts each subnet can have.
Vantage RADIUS User’s Guide IP Address 192.168.1. 64 IP Address (Binary) 11000000.10101000.00000001. 01000000 Subnet Mask (Binary) 11111111.11111111.11111111. 11000000 Subnet Address: 192.168.1.64 Lowest Host ID: 192.168.1.65 Broadcast Address: 192.168.1.127 Highest Host ID: 192.168.1.126 Chart H-9 Subnet 3 NETWORK NUMBER LAST OCTET BIT VALUE IP Address 192.168.1. 128 IP Address (Binary) 11000000.10101000.00000001. 10000000 Subnet Mask (Binary) 11111111.11111111.11111111.
Vantage RADIUS User’s Guide Chart H-11 Eight Subnets SUBNET SUBNET ADDRESS FIRST ADDRESS LAST ADDRESS BROADCAST ADDRESS 1 0 1 30 31 2 32 33 62 63 3 64 65 94 95 4 96 97 126 127 5 128 129 158 159 6 160 161 190 191 7 192 193 222 223 8 224 223 254 255 The following table is a summary for class “C” subnet planning. Chart H-12 Class C Subnet Planning NO. “BORROWED” HOST BITS SUBNET MASK NO. SUBNETS NO. HOSTS PER SUBNET 1 255.255.255.128 (/25) 2 126 2 255.255.
Vantage RADIUS User’s Guide The following table is a summary for class “B” subnet planning. Chart H-13 Class B Subnet Planning NO. “BORROWED” HOST BITS SUBNET MASK NO. SUBNETS NO. HOSTS PER SUBNET 1 255.255.128.0 (/17) 2 32766 2 255.255.192.0 (/18) 4 16382 3 255.255.224.0 (/19) 8 8190 4 255.255.240.0 (/20) 16 4094 5 255.255.248.0 (/21) 32 2046 6 255.255.252.0 (/22) 64 1022 7 255.255.254.0 (/23) 128 510 8 255.255.255.0 (/24) 256 254 9 255.255.255.
Vantage RADIUS User’s Guide Appendix I Command Interpreter The following describes how to use the command interpreter. Use of undocumented commands or misconfiguration can damage the unit and possibly render it unusable. Command Syntax The interface outputs are in courier new font. Command keywords are emboldened and you should enter them exactly as shown, do not abbreviate. The required fields in a command are enclosed in angle brackets <>.
Vantage RADIUS User’s Guide help [netconf|exit] help [http/https] Type h or help before a command to see its usage. Vantage> help netconf netconf netconf ip [IP address] netmask [netmask] gateway [gateway IP address] netconf dns1 [dns1 IP address] dns2 [dns2 IP address] Vantage> help exit exit Vantage> help http http http [enable/disable] Vantage> help https https https [enable/disable] For example, help https shows that you can type https or https enable or https disable.
Vantage RADIUS User’s Guide IP Address Netmask Gateway Primary DNS Secondary DNS MAC : : : : : : 192.168.1.3 255.255.255.0 192.168.1.254 168.95.1.1 168.95.192.1 00:00:84:40:50:05 For example, if you wanted to change the IP address on your Vantage RADIUS from 192.168.1.3 to 192.168.1.40 because another device has the same IP address and also the gateway address has changed to 192.168.1.154, type the following: netconf IP 192.168.1.40 gateway 192.168.1.
Vantage RADIUS User’s Guide Type http, to show the current status of your HTTP settings. Vantage> http REMOTE ACCESS HTTP : yes Port : 80 Type http enable to allow remote HTTP access to Vantage RADIUS. Type http disable to have Vantage RADIUS block remote http access. https Type https, to show the current status of your HTTPS settings. Vantage> http REMOTE ACCESS HTTP : yes Port : 80 Type https enable to allow remote HTTPS access to Vantage RADIUS.
Vantage RADIUS User’s Guide Appendix J Power Adaptor Specifications NORTH AMERICAN PLUG STANDARDS AC Power Adaptor Model HPW-1005U Input Power AC120V/60HZ Output Power DC 5V Power Consumption 2.2W Safety Standards UL/C-UL EUROPEAN PLUG STANDARDS AC Power Adaptor Model HPW-1005U Input Power AC220V/50HZ Output Power DC 5V Power Consumption 5.
Vantage RADIUS User’s Guide Power Consumption 1.8 W Safety Standards PSE AUSTRALIA AND NEW ZEALAND PLUG STANDARDS AC Power Adaptor Model HPW-1005U Input Power AC240V/50HZ Output Power DC 5V Power Consumption 6.
Vantage RADIUS User’s Guide Appendix K Index A Access- Challenge ................................... 4-6 Access- Request ...................................... 4-6 Access- Response .................................... 4-6 Access-Accept ......................................... 4-5 Access-Reject .......................................... 4-5 Access-Request ....................................... 4-5 Accounting .............................................. 1-4 Address Assignment.............................
Vantage RADIUS User’s Guide DHCP Client List .................................... 3-7 DHCP Pool .............................................. 3-6 DHCP Server Client List ......................... 3-7 DHCP Server Setup................................. 3-5 Digital IDs ............................................... 5-3 Direct Sequence Spread Spectrum .......... E-2 Disclaimer .................................................. ii Distribution System................................. E-3 Domain Name...........
Vantage RADIUS User’s Guide RADIUS Logs ................................... 4-10 Real Time System ............................... 4-7 Settings .............................................. 4-14 System Events ..................................... 4-3 System Log Files ................................. 4-9 User Trace Events ............................... 4-6 User Trace Log Files ......................... 4-13 M MAC Address.......................................... 3-2 Main Menu .............................
Vantage RADIUS User’s Guide Subnet Mask ............................................ 3-1 Subnet Masks ......................................... H-2 Subnetting............................................... H-3 Support Disk........................................... xvii Syntax Conventions................................ xvii Syslog ...................................................... 4-2 System Status .......................................... 6-1 System Timeout.......................................