Installation guide ADSL-Modem

ENGLISH

PARAMETER SETTING

DSL Protocol and Multiplexing type • PPP over ATM VCMUX (RFC2364)

• PPP over ATM LLC (RFC2364)

• Bridged IP over ATM LLCSNAP (RFC1483)

• Routed IP over ATM LLCSNAP (RFC1483)

• Bridged IP over ATM VCMUX (RFC1483)

• Routed IP over ATM VCMUX (RFC1483)

• Classical IP over ATM (RFC1577)

• PPP over Ethernet VCMUX (RFC2516)

• PPP over Ethernet LLCSNAP (RFC2516)

Modulation • G.Dmt

• G.Lite

• ANSI T1.413

Peak Cell Rate • Line rate

• ______ Kbps

Virtual Path Identifier (VPI)

Virtual Channel Identifier (VCI)

IP Address and Subnet mask • Automatically set by ISP

• Assigned manually

Address:

Subnet mask:

DNS Address • Automatically set by ISP

• Use the following

Preferred DNS Server:

Alternative DNS Server:

Default gateway address

User name and Password for PPP connections Username:

Password:

6. Screens pop up to report the progress of the installation. You do not need to click anything until you are

prompted to plug in your modem.

Connect your modem to the computer.

7. When the installation has successfully completed, click Finish to close the wizard.

8. If your connection is using PPPoE or PPPoA protocol, the ZyXEL ADSL Link icon will appear on your desktop.

Double click on the icon to activate connection to your ISP.