User`s guide

Prestige 630 ADSL USB Modem
Software Setup and Modem Installation 1-3
Step 3. Read the license agreement and click Yes.
Step 4. If your service provider is not listed, highlight Other Service Provider and click Next > to
continue.
Step 5. At the Select Driver Type window, highlight the driver you want to install and click Next >.
Step 6. Use the Communication Settings window (shown next) to configure VPI, VCI, Encapsulation
and Modulation type. Then click Next >.
Figure 1-1 Communications Settings Window
Encapsulation types vary depending upon the application.
Check the Auto-Modulation option box to enable the standard stored in the
Windows

 Registry (G.dmt or Multimode); if you fail to connect within 10 seconds,
then try another standard.
Step 7. At the Start Copying Files window, review your current settings. Click Customize or < Back to
change the settings. Click Next > to accept the current settings.
For Windows

 2000 applications, the Digital Signature Not Found window warns that
the installation software is not a digitally signed version. A digital signature is not