User's Manual
Table Of Contents
- User’s Guide
- Copyright
- Certifications
- ZyXEL Limited Warranty
- Safety Warnings
- Customer Support
- Table of Contents
- List of Figures
- List of Tables
- Preface
- Getting Started
- Tutorial
- Wireless LAN Network
- ZyXEL Utility Configuration
- Maintenance
- Troubleshooting
- Product Specifications
- Management with Wireless Zero Configuration
- Wireless Security
- Types of EAP Authentication
- EAP-MD5 (Message-Digest Algorithm 5)
- EAP-TLS (Transport Layer Security)
- EAP-TTLS (Tunneled Transport Layer Service)
- PEAP (Protected EAP)
- LEAP
- Dynamic WEP Key Exchange
- WPA and WPA2
- Encryption
- User Authentication
- WPA(2)-PSK Application Example
- WPA(2) with RADIUS Application Example
- Security Parameters Summary
- Setting up Your Computer’s IP Address
- Index
ZyXEL AG-120 User’s Guide
30 Chapter 2 Tutorial
Note: Only one profile can be activated and used at any given time.
Figure 15 ZyXEL Utility: Profile Activate
8 When you activate the new profile, the ZyXEL utility goes to the Link Info screen while
it connects to the AP using your settings. When the wireless link is established, the
ZyXEL utility icon in the system tray turns green and the Link Info screen displays
details of the active connection.
9 Make sure the selected AP in the active profile is connected to the Internet. Open your
Internet browser, enter http://www.zyxel.com or the URL of any other web site in the
address bar and press ENTER. If you are able to access the web site, your new profile is
successfully configured.
10If you cannot access the Internet, go back to the Profile screen. Select the profile you are
using and click Edit. Check the details you entered previously. Also, refer to the
Troubleshooting section of this User's Guide or contact your network administrator if
necessary.