User's Manual
Table Of Contents
- User’s Guide
- Copyright
- Certifications
- ZyXEL Limited Warranty
- Safety Warnings
- Customer Support
- Table of Contents
- List of Figures
- List of Tables
- Preface
- Getting Started
- Tutorial
- Wireless LAN Network
- ZyXEL Utility Configuration
- Maintenance
- Troubleshooting
- Product Specifications
- Management with Wireless Zero Configuration
- Wireless Security
- Types of EAP Authentication
- EAP-MD5 (Message-Digest Algorithm 5)
- EAP-TLS (Transport Layer Security)
- EAP-TTLS (Tunneled Transport Layer Service)
- PEAP (Protected EAP)
- LEAP
- Dynamic WEP Key Exchange
- WPA and WPA2
- Encryption
- User Authentication
- WPA(2)-PSK Application Example
- WPA(2) with RADIUS Application Example
- Security Parameters Summary
- Setting up Your Computer’s IP Address
- Index
ZyXEL AG-120 User’s Guide
50 Chapter 4 ZyXEL Utility Configuration
4.3.1 Adding a New Profile
Follow the steps below to add a new profile.
1 Click Add in the Profile screen. An Add New Profile screen displays as shown next.
Click Next to continue.
Figure 26 Profile: Add a New Profile
The following table describes the labels in this screen.
Channel This field displays the channel number used by the profile.
Security This field shows whether data encryption is activated (WEP, WPA-PSK, WPA-
RADIUS, RADIUS, WPA2-RADIUS, WPA2-PSK) or inactive (Disable).
Transfer Rate This field displays the transmission speed of the selected profile in megabits per
second (Mbps).
Table 10 Profile (continued)
LABEL DESCRIPTION
Table 11 Profile: Add a New Profile
LABEL DESCRIPTION
Add New Profile
Profile Name Enter a descriptive name in this field.
SSID Select an available wireless device in the Scan Info table and click Select, or enter
the SSID of the wireless device to which you want to associate in this field
manually. Otherwise, enter Any to have the AG-120 associate to any AP or roam
between any infrastructure wireless networks.