User's Manual
Table Of Contents
- User’s Guide
- Copyright
- Certifications
- ZyXEL Limited Warranty
- Safety Warnings
- Customer Support
- Table of Contents
- List of Figures
- List of Tables
- Preface
- Getting Started
- Tutorial
- Wireless LAN Network
- ZyXEL Utility Configuration
- Maintenance
- Troubleshooting
- Product Specifications
- Management with Wireless Zero Configuration
- Wireless Security
- Types of EAP Authentication
- EAP-MD5 (Message-Digest Algorithm 5)
- EAP-TLS (Transport Layer Security)
- EAP-TTLS (Tunneled Transport Layer Service)
- PEAP (Protected EAP)
- LEAP
- Dynamic WEP Key Exchange
- WPA and WPA2
- Encryption
- User Authentication
- WPA(2)-PSK Application Example
- WPA(2) with RADIUS Application Example
- Security Parameters Summary
- Setting up Your Computer’s IP Address
- Index
ZyXEL AG-120 User’s Guide
54 Chapter 4 ZyXEL Utility Configuration
Figure 30 Profile: Confirm New Settings
6 To use this network profile, click the Activate Now button. Otherwise, click the Activate
Later button. You can activate only one profile at a time.
Note: Once you activate a profile, the ZyXEL utility will use that profile the next time it
is started.
Figure 31 Profile: Activate the Profile
4.4 The Advanced Screen
To set the wireless LAN mode of the AG-120, click the Advanced tab.
Select Auto to have the AG-120 connect to either an IEEE 802.11a or an IEEE 802.11b/g
wireless device. If you select 802.11a, the AG-120 can connect to an IEEE 802.11a wireless
device only. If you select 802.11b+g, the AG-120 can connect to an IEEE 802.11b or g
wireless device only. Click Save to save the changes back to the AG-120.