User Manual

ManualsBrandsZyXEL Communications ManualsComputers & Accessories802.11a/g Wireless PCI Adapter

Table Of Contents

Copyright
Certifications
ZyXEL Limited Warranty
Safety Warnings
Customer Support
Table of Contents
List of Figures
List of Tables
Preface
Getting Started
- 1.1 About Your AG-320
- 1.2 Application Overview
  - 1.2.0.1 Infrastructure
  - 1.2.0.2 Ad-Hoc
- 1.3 AG-320 Hardware and Utility Installation
  - 1.3.1 ZyXEL Utility Icon
- 1.4 Configuration Methods
  - 1.4.1 Enabling WZC
  - 1.4.2 Accessing the ZyXEL Utility
Tutorial
- 2.1 Connecting to a Wireless LAN
- 2.2 Creating and Using a Profile
Wireless LAN Network
- 3.1 Wireless LAN Overview
- 3.2 Wireless LAN Security
  - 3.2.1 User Authentication and Encryption
- 3.3 Introduction to OTIST
ZyXEL Utility Configuration
- 4.1 The Link Info Screen
  - 4.1.1 Trend Chart
- 4.2 The Site Survey Screen
  - 4.2.1 Security Settings
  - 4.2.2 Confirm New Settings
- 4.3 The Profile Screen
  - 4.3.1 Adding a New Profile
- 4.4 The Advanced Screen
- 4.5 The Adapter Screen
Maintenance
- 5.1 The About Screen
- 5.2 Uninstalling the ZyXEL Utility
- 5.3 Upgrading the ZyXEL Utility
Troubleshooting
- 6.1 Problems Starting the ZyXEL Utility
- 6.2 Problem with the Link Quality
- 6.3 Problems Communicating With Other Computers
Product Specifications
Management with Wireless Zero Configuration
- Activating Wireless Zero Configuration
- Connecting to a Wireless Network
- Security Settings
  - Association
  - Authentication
- Ordering the Preferred Networks
Wireless Security
- Types of EAP Authentication
- Dynamic WEP Key Exchange
- WPA and WPA2
- Security Parameters Summary
Setting up Your Computer’s IP Address
- Windows 95/98/Me
- Windows 2000/NT/XP
  - Verifying Settings
- Macintosh OS 8/9
  - Verifying Settings
- Macintosh OS X
  - Verifying Settings
Index
- A
- C
- D
- E
- F
- G
- H
- I
- L
- M
- N
- O
- P
- Q
- R
- S
- T
- U
- V
- W
- Z

ZyXEL AG-320 User’s Guide

44 Chapter 4 ZyXEL Utility Configuration

4.2.1.2 WPA-PSK/WPA2-PSK

Figure 21 Security Setting: WPA-PSK/WPA2-PSK

The following table describes the labels in this screen.

4.2.1.3 WPA/WPA2

Figure 22 Security Setting: WPA/WPA2

Table 6 Security Setting: WPA-PSK/WPA2-PSK

LABEL DESCRIPTION

Encryption Type The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are

the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses

a simple common password, instead of user-specific credentials.

Select the encryption type (TKIP or AES) for data encryption.

Refer to Section 3.2.1.3 on page 34 for more information.

Pre-Shared Key Type a pre-shared key (same as the AP or peer device) of between 8 and 63 case-

sensitive ASCII characters (including spaces and symbols) or 64 hexadecimal

characters.

Back Click Back to go to the Site Survey screen to select and connect to another

network.

Next Click Next to confirm your selections and advance to the Confirm New Settings

screen. Refer to Section 4.2.2 on page 46.

Exit Click Exit to return to the Site Survey screen without saving.