User's Manual Part 1

Chapter 13 802.1Q/1P
AMG1202-T10A User’s Guide
156
13.2.1 Editing 802.1Q/1P Group Setting
Use this screen to configure the settings for each VLAN group.
In the 802.1Q/1P screen, click the Edit button from the Modify filed to display the following
screen.
Figure 82 Advanced > 802.1Q/1P > Group Setting > Edit
The following table describes the labels in this screen.
Table 56 Advanced > 802.1Q/1P > Group Setting > Edit
LABEL DESCRIPTION
Active Select this check box to activate the group setting.
VLAN ID Assign a VLAN ID for the VLAN group. The valid VID range is between 1 and
4094.
Default Gateway Select the default gateway for the VLAN group.
Ports This field displays the types of ports available to join the VLAN group.
Control Select Fixed for the port to be a permanent member of the VLAN group.
Select Forbidden if you want to prohibit the port from joining the VLAN group.
Tx Tag Select Tx Tagging if you want the port to tag all outgoing traffic transmitted
through this VLAN. You select this if you want to create VLANs across different
devices and not just the ZyXEL Device.
Back Click this to return to the previous screen without saving.