User's Manual Part 1

Chapter 16 Remote Management
AMG1202-T10A User’s Guide
176
16.6 The DNS Screen
Use DNS (Domain Name System) to map a domain name to its corresponding IP address and vice
versa. Refer to Chapter 7 on page 85 for background information.
Use this screen to set from which IP address the ZyXEL Device will accept DNS queries and on
which interface it can send them your ZyXEL Device’s DNS settings. This feature is not available
when the ZyXEL Device is set to bridge mode. Click Advanced > Remote MGMT > DNS to change
your ZyXEL Device’s DNS settings.
Figure 94 Advanced > Remote Management > DNS
The following table describes the labels in this screen.
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to begin configuring this screen afresh.
Table 66 Advanced > Remote MGMT > SNMP (continued)
LABEL DESCRIPTION
Table 67 Advanced > Remote Management > DNS
LABEL DESCRIPTION
Server Port The DNS service port number is 53 and cannot be changed here.
Server Access Select the interface(s) through which a computer may send DNS queries to the
ZyXEL Device.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to send DNS queries to
the ZyXEL Device.
Select All to allow any computer to send DNS queries to the ZyXEL Device.
Choose Selected to just allow the computer with the IP address that you specify
to send DNS queries to the ZyXEL Device.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.