User's Manual Part 1

Chapter 18 System Settings
AMG1202-T10A User’s Guide
190
18.3 The Time and Date Screen
Use this screen to configure the ZyXEL Device’s time based on your local time zone. To change your
ZyXEL Device’s time and date, click Maintenance > System > Time and Date. The screen
appears as shown.
Figure 98 Maintenance > System > Time and Date
The following table describes the fields in this screen.
Retype to
confirm
Type the new password again for confirmation.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
Table 70 Maintenance > System > General
LABEL DESCRIPTION
Table 71 Maintenance > System > Time and Date
LABEL DESCRIPTION
Current Time and Date
Current Time This field displays the time of your ZyXEL Device.
Each time you reload this page, the ZyXEL Device synchronizes the time with
the time server.
Current Date This field displays the date of your ZyXEL Device.
Each time you reload this page, the ZyXEL Device synchronizes the date with
the time server.
Time and Date Setup