Manualshelf

User's Manual Part 1

ManualsBrandsZyXEL Communications ManualsElectronicsWireless N-Lite ADSL2+ 4-port Gateway
21222324252627282930
Chapter 1 Introduction
AMG1202-T10A User’s Guide
25
1.7 The RESET Button
If you forget your password or cannot access the web configurator, you will need to use the RESET
button at the back of the device to reload the factory-default configuration file. This means that you
will lose all configurations that you had previously and the password will be reset to “1234”.
1.7.1 Using the Reset Button
1 Make sure the POWER LED is on (not blinking).
2 To set the device back to the factory default settings, press the RESET button for ten seconds or
until the POWER LED begins to blink and then release it. When the POWER LED begins to blink,
the defaults have been restored and the device restarts.