Manualshelf

User's Manual Part 1

ManualsBrandsZyXEL Communications ManualsElectronicsWireless N-Lite ADSL2+ 4-port Gateway
31323334353637383940
Chapter 2 The Web Configurator
AMG1202-T10A User’s Guide
31
2.2.3 Main Window
The main window displays information and configuration fields. It is discussed in the rest of this
document.
Right after you log in, the Status screen is displayed. See Chapter 3 on page 33 for more
information about the Status screen.
2.2.4 Status Bar
Check the status bar when you click Apply or OK to verify that the configuration has been updated.
QoS General Use this screen to enable QoS and traffic prioritizing. You can also
configure the QoS rules and actions.
Dynamic
DNS
This screen allows you to use a static hostname alias for a dynamic IP
address.
Remote
MGMT
WWW Use this screen to configure through which interface(s) and from which
IP address(es) users can use HTTP to manage the ZyXEL Device.
Telnet Use this screen to configure through which interface(s) and from which
IP address(es) users can use Telnet to manage the ZyXEL Device.
FTP Use this screen to configure through which interface(s) and from which
IP address(es) users can use FTP to access the ZyXEL Device.
SNMP Use this screen to configure through which interface(s) and from which
IP address(es) users can access the SNMP agent on the ZyXEL Device.
DNS Use this screen to configure through which interface(s) and from which
IP address(es) users can send DNS queries to the ZyXEL Device.
ICMP Use this screen to set whether or not your device will respond to pings
and probes for services that you have not made available.
UPnP General Use this screen to turn UPnP on or off.
Maintenance
System General Use this screen to configure your device’s password.
Time and Date Use this screen to change your ZyXEL Device’s time and date.
Logs System Log Use this screen to select which logs your device is to record.
Tools Firmware Use this screen to upload firmware to your device.
Configuration Use this screen to backup and restore your device’s configuration
(settings) or reset the factory default settings.
Restart This screen allows you to reboot the ZyXEL Device without turning the
power off.
Diagnostic General Use this screen to test the connections to other devices.
DSL Line This screen displays information to help you identify problems with the
DSL connection.
Table 3 Navigation Panel Summary
LINK TAB FUNCTION