User's Manual Part 1

Chapter 4 Tutorials
AMG1202-T10A User’s Guide
47
computer A (in N1 network) to computer B (in N2 network), the traffic is sent to the ZyXEL
Device’s WAN default gateway by default. In this case, B will never receive the traffic.
You need to specify a static routing rule on the ZyXEL Device to specify R as the router in charge of
forwarding traffic to N2. In this case, the ZyXEL Device routes traffic from A to R and then R routes
the traffic to B.
This tutorial uses the following example IP settings:
Table 5 IP Settings in this Tutorial
DEVICE / COMPUTER IP ADDRESS
The ZyXEL Device’s WAN 172.16.1.1
The ZyXEL Device’s LAN 192.168.1.1
A 192.168.1.34
R’s N1 192.168.1.253
N2
B
N1
A
R
N2
B
N1
A
R