User's Manual Part 1

Chapter 5 Internet and Wireless Setup Wizard
AMG1202-T10A User’s Guide
63
• If the user name and/or password you entered for PPPoE or PPPoA connection are not correct,
the screen displays as shown next. Click Back to Username and Password setup to go back
to the screen where you can modify them.
Figure 20 Connection Test Failed-1
• If the following screen displays, check if your account is activated or click Restart the Internet/
Wireless Setup Wizard to verify your Internet access settings.
Figure 21 Connection Test Failed-2.
5.3 Wireless Connection Wizard Setup
After you configure the Internet access information, use the following screens to set up your
wireless LAN.
Apply Click this to save your changes.
Exit Click this to close the wizard screen without saving.
Table 11 Internet Connection with PPPoA (continued)
LABEL DESCRIPTION