User's Manual Part 1

Chapter 6 WAN Setup
AMG1202-T10A User’s Guide
73
6.2.1 Advanced Internet Access Setup
Use this screen to edit your ZyXEL Device's advanced WAN settings. Click the Advanced Setup
button in the Internet Access Setup screen. The screen appears as shown.
Figure 31 Network > WAN > Internet Access Setup: Advanced Setup
The following table describes the labels in this screen.
Cancel Click this to restore your previously saved settings.
Advanced Setup Click this to display the Advanced WAN Setup screen and edit more details
of your WAN setup.
Table 16 Network > WAN > Internet Access Setup (continued)
LABEL DESCRIPTION
Table 17 Network > WAN > Internet Access Setup: Advanced Setup
LABEL DESCRIPTION
RIP & Multicast
Setup
This section is not available when you configure the ZyXEL Device to be in
bridge mode.
RIP Direction RIP (Routing Information Protocol) allows a router to exchange routing
information with other routers. Use this field to control how much routing
information the ZyXEL Device sends and receives on the subnet.
Select the RIP direction from None, Both, In Only and Out Only.
RIP Version This field is not configurable if you select None in the RIP Direction field.
Select the RIP version from RIP-1, RIP-2B and RIP-2M.