User's Manual Part 2

Chapter 19 Logs
AMG1202-T10A User’s Guide
201
The following table shows RFC-2408 ISAKMP payload types that the log displays. Please refer to
RFC 2408 for detailed information on each type.
0
Pointer indicates the error
13
Timestamp
0
Timestamp request message
14
Timestamp Reply
0
Timestamp reply message
15
Information Request
0
Information request message
16
Information Reply
0
Information reply message
Table 87 Syslog Logs
LOG MESSAGE DESCRIPTION
<Facility*8 + Severity>Mon dd
hr:mm:ss hostname
src="<srcIP:srcPort>"
dst="<dstIP:dstPort>"
msg="<msg>" note="<note>"
devID="<mac address last three
numbers>" cat="<category>
"This message is sent by the system ("RAS" displays as
the system name if you haven’t configured one) when the
router generates a syslog. The facility is defined in the
web MAIN MENU->LOGS->Log Settings page. The
severity is the log’s syslog class. The definition of
messages and notes are defined in the various log charts
throughout this appendix. The “devID” is the last three
characters of the MAC address of the router’s LAN port.
The “cat” is the same as the category in the router’s logs.
Table 88 RFC-2408 ISAKMP Payload Types
LOG DISPLAY PAYLOAD TYPE
SA
Security Association
PROP
Proposal
TRANS
Transform
KE
Key Exchange
ID
Identification
CER
Certificate
CER_REQ
Certificate Request
HASH
Hash
SIG
Signature
NONCE
Nonce
NOTFY
Notification
DEL
Delete
VID
Vendor ID
Table 86 ICMP Notes (continued)
TYPE CODE DESCRIPTION