User's Manual Part 2

Appendix A Setting up Your Computer’s IP Address
AMG1202-T10A User’s Guide
244
2 Double-click on the profile of the network card you wish to configure. The Ethernet Device
General screen displays as shown.
Figure 137 Red Hat 9.0: KDE: Ethernet Device: General
• If you have a dynamic IP address, click Automatically obtain IP address settings with and
select dhcp from the drop down list.
• If you have a static IP address, click Statically set IP Addresses and fill in the Address,
Subnet mask, and Default Gateway Address fields.
3 Click OK to save the changes and close the Ethernet Device General screen.
4 If you know your DNS server IP address(es), click the DNS tab in the Network Configuration
screen. Enter the DNS server information in the fields provided.
Figure 138 Red Hat 9.0: KDE: Network Configuration: DNS
5 Click the Devices tab.