User's Guide Part 1

Chapter 3 Internet / Wireless Setup Wizard
AMG1302/AMG1202-TSeries User’s Guide
34
Figure 12 Internet Connection with PPPoE
The following table describes the fields in this screen.
• If the user name and/or password you entered for PPPoE or PPPoA connection are not
correct, you are prompted to enter the correct information.
Table 6 Internet Connection with PPPoE
LABEL DESCRIPTION
User Name Enter the user name exactly as your ISP assigned. If assigned a name in
the form user@domain where domain identifies a service name, then enter
both components exactly as given.
Password Enter the password associated with the user name above.
Multiplex Select the multiplexing method used by your ISP from the Mult iplex drop-
down list box either VC-based or LLC-based.
VPI Enter the Virtual Path Identifier (VPI) assigned to you. This field may
already be configured.
VCI Enter the Virtual Channel Identifier (VCI) assigned to you. This field may
already be configured.
Select Ye s to enter specific IP information from your Internet service provider. Enter
your Internet access information exactly as your service provider gave it to you.
IP Address Enter the IP address of the AMG1302/AMG1202-TSeries.
Primary DNS
Server
Enter the primary DNS server IP address for the AMG1302/AMG1202-
TSeries.
Secondary
DNS Server
Enter the secondary DNS server IP address for the AMG1302/AMG1202-
TSeries.
Back Click this to return to the previous screen without saving.
Apply Click this to save your changes.
Exit Click this to close the wizard screen without saving.