User's Guide Part 1

Chapter 4 Tutorials
AMG1302/AMG1202-TSeries User’s Guide
58
Configured WAN connections can be viewed by clicking the M or e Connect ion s tab under Ne t w ork
Se t t ing > Broa dba nd. See the WAN Setup chapter (Chapter 6 on page 73) for more information
on configuring WAN connections and ATM QoS settings.
4.9.2 Configuring Port Binding
You can then group specific WAN PVCs with LAN ports or WLANs, so traffic from these ports is
forwarded through specific WAN PVCs. In the configuration shown below, the WAN connections set
up in the previous section are bound as follows:
1 Access the port binding screen by clicking N et w ork Set ting > Port Binding, and select Act ivated
Por t Binding to turn on the port binding feature.
2 Click the Port Binding tab, specify the Group I ndex and select the ports to include in the port
binding group. Click Apply.
Table 9 Port Binding Groups
GROUP INDEX WAN CONNECTION LAN PORT
0 PVC0 - for Data eth1, eth2, AP0
1 PVC1 - for VoIP eth3
2 PVC2 - for MOD eth4