User's Guide Part 1

Chapter 5 Connection Status and System Info Screens
AMG1302/AMG1202-TSeries User’s Guide
70
DHCP This field displays what DHCP services the AMG1302/AMG1202-TSeries is providing to
the LAN. Choices are:
Serve r - The AMG1302/AMG1202-TSeries is a DHCP server in the LAN. It assigns IP
addresses to other computers in the LAN.
Re la y - The AMG1302/AMG1202-TSeries acts as a surrogate DHCP server and relays
DHCP requests and responses between the remote server and the clients.
N one - The AMG1302/AMG1202-TSeries is not providing any DHCP services to the LAN.
IPv6 LAN DNS1/
2
This is the first/second DNS server IPv6 address the AMG1302/AMG1202-TSeries
passes to the DHCP clients.
WLAN Information
Status This displays whether wireless LAN is turned on or off.
SSID This is the descriptive name used to identify the AMG1302/AMG1202-TSeries in the
wireless LAN.
Channel This is the channel number used by the AMG1302/AMG1202-TSeries now.
Security Mode This displays the type of security the AMG1302/AMG1202-TSeries is using in the
wireless LAN.
WPS Configur e d displays when the WPS security settings have been configured and wireless
clients can connect with the device through WPS. Uncon figur e d displays when the
device has not been configured and wireless clients can’t establish a link with the device
through WPS.
Scheduling This displays whether WLAN scheduling is activated.
WiFi MAC This is the MAC (Media Access Control) of the WiFi interface.
Security
Firewall
This displays whether or not the AMG1302/AMG1202-TSeries’s firewall is activated.
Click this to go to the screen where you can change it.
Interface Status
Interface This column displays each interface the AMG1302/AMG1202-TSeries has.
Status This field indicates whether or not the AMG1302/AMG1202-TSeries is using the
interface.
For the DSL interface, this field displays Dow n (line is down), Up (line is up or
connected), I nit ia lizing (line is initializing), Est ablish ing Link (line is establishing a
link) if you're using Ethernet encapsulation and Dow n (line is down), Up (line is up or
connected), I dle (line (ppp) idle), D ia l (starting to trigger a call) and Drop (dropping a
call) if you're using PPPoE encapsulation.
For the LAN interface, this field displays Up when the AMG1302/AMG1202-TSeries is
connected through an Ethernet cable to a computer or a HUB. It displays Dow n when
the AMG1302/AMG1202-TSeries’s Ethernet port is disconnected.
For the WLAN interface, it displays Act ive when WLAN is enabled or I nAct ive when
WLAN is disabled.
Rate For the LAN interface, this displays the port speed.
For the WAN interface, this displays the DSL link rate downstream and upstream.
For the DSL interface, it displays the downstream and upstream transmission rate.
For the WLAN interface, it displays the maximum transmission rate when WLAN is
enabled or N / A when WLAN is disabled.
System Status
DSL Up Time This field displays how long the DSL connection has been active.
LABEL DESCRIPTION