User's Manual

Chapter 16 Parental Control
AMG1302/AMG1202-TSeries User’s Guide
193
Parental Control
Profile Name
Enter a descriptive name for the rule.
Home Network User
Select the LAN user that you want to apply this rule to from the drop-down list box. If
you select Custom, enter the LAN user’s MAC address. If you select All, the rule
applies to all LAN users.
Internet Access Schedule
Day Select check boxes for the days that you want the AMG1302/AMG1202-TSeries to
perform parental control.
Time of Day to Apply Enter the starting and ending time that the LAN user is allowed access.
Network Service
Network Service
Setting
If you select Block, the AMG1302/AMG1202-TSeries prohibits the users from viewing
the Web sites with the URLs listed below.
If you select Access, the AMG1302/AMG1202-TSeries blocks access to all URLs except
ones listed below.
Add new service Click this to show a screen in which you can add a new service rule. You can configure
the Service Name, Protocol, and Name of the new rule.
Active This shows whether a configured service is activated or not.
Service Name This shows the name of the rule.
Protocol This shows the protocol of the rule.
Port This shows the port of the rule.
Modify Click the Edit icon to go to the screen where you can edit the rule.
Click the Delete icon to delete an existing rule.
Blocked Site/URL Enter the URL of web sites or URL keywords to which the AMG1302/AMG1202-TSeries
blocks access.
Apply Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.
Table 69 Parental Control: Add/Edit (continued)
LABEL DESCRIPTION