User's Manual

ManualsBrandsZyXEL Communications ManualsElectronicsWireless N ADSL2+ 4-port Gateway

Table Of Contents

Dynamic DNS Setup
- 13.1 Overview
  - 13.1.1 What You Can Do in the DDNS Screen
  - 13.1.2 What You Need To Know About DDNS
- 13.2 The Dynamic DNS Screen
Filters
- 14.1 Overview
  - 14.1.1 What You Can Do in the Filter Screens
  - 14.1.2 What You Need to Know About Filtering
- 14.2 The IP/MAC Filter Screen
- 14.3 IPv6/MAC Filter
Firewall
- 15.1 Overview
  - 15.1.1 What You Can Do in the Firewall Screens
  - 15.1.2 What You Need to Know About Firewall
- 15.2 The Firewall General Screen
- 15.3 The Default Action Screen
- 15.4 The Rules Screen
- 15.5 The DoS Screen
  - 15.5.1 The DoS Advanced Screen
  - 15.5.2 Configuring Firewall Thresholds
- 15.6 Firewall Technical Reference
Parental Control
- 16.1 Overview
- 16.2 The Parental Control Screen
  - 16.2.1 Add/Edit Parental Control Rule
Certificate
- 17.1 Overview
  - 17.1.1 What You Can Do in this Chapter
- 17.2 What You Need to Know
- 17.3 Local Certificates
- 17.4 The Trusted CA Screen
- 17.5 Trusted CA Import
- 17.6 View Certificate
Logs
- 18.1 Overview
  - 18.1.1 What You Can Do in this Chapter
  - 18.1.2 What You Need To Know
- 18.2 The System Log Screen
Traffic Status
- 19.1 Overview
  - 19.1.1 What You Can Do in this Chapter
- 19.2 The WAN Status Screen
- 19.3 The LAN Status Screen
- 19.4 The NAT Screen
User Account
- 20.1 Overview
- 20.2 The User Account Screen
TR-069 Client
- 21.1 Overview
- 21.2 The TR-069 Client Screen
System Settings
- 22.1 Overview
  - 22.1.1 What You Can Do in the System Settings Screens
- 22.2 The System Screen
- 22.3 The Time Screen
Firmware Upgrade
- 23.1 Overview
- 23.2 The Firmware Screen
Backup/Restore
- 24.1 Overview
- 24.2 The Backup/Restore Screen
- 24.3 The Reboot Screen
Remote Management
- 25.1 Overview
  - 25.1.1 What You Can Do in the Remote Management Screens
  - 25.1.2 What You Need to Know About Remote Management
- 25.2 The WWW Screen
  - 25.2.1 Configuring the WWW Screen
- 25.3 The Telnet Screen
- 25.4 The FTP Screen
- 25.5 The SNMP Screen
  - 25.5.1 Configuring SNMP
- 25.6 The DNS Screen
- 25.7 The ICMP Screen
- 25.8 The SSH Screen
  - 25.8.1 SSH Example
Diagnostic
- 26.1 Overview
  - 26.1.1 What You Can Do in the Diagnostic Screens
- 26.2 The General Screen
- 26.3 The DSL Line Screen
Troubleshooting
- 27.1 Power, Hardware Connections, and LEDs
- 27.2 AMG1302/AMG1202-TSeries Access and Login
- 27.3 Internet Access
Setting up Your Computer’s IP Address
IP Addresses and Subnetting
Pop-up Windows, JavaScripts and Java Permissions
Wireless LANs
IPv6
Services
Legal Information
Index

Chapter 21 TR-069 Client

AMG1302/AMG1202-TSeries User’s Guide

210

Figure 106 Maintenance > TR-069 Client

The following table describes the fields in this screen.

Table 80 Maintenance > TR-069 Client

LINK DESCRIPTION

CWMP Select Enable to allow the AMG1302/AMG1202-TSeries to be managed by a management

server or select Disable to not allow the AMG1302/AMG1202-TSeries to be managed by a

management server.

ACS URL Type the IP address or domain name of the management server. If the AMG1302/AMG1202-

TSeries is behind a NAT router that assigns it a private IP address, you will have to

configure a NAT port forwarding rule on the NAT router.

ACS User Name The user name is used to authenticate the AMG1302/AMG1202-TSeries when making a

connection to the management server. This user name on the management server and the

AMG1302/AMG1202-TSeries must be the same. Type a user name of up to 255 printable

characters found on an English-language keyboard. Spaces and characters such as

@#$%^&*()_+ are allowed.

ACS Password The password is used to authenticate the AMG1302/AMG1202-TSeries when making a

connection to the management server. This password on the management server and the

AMG1302/AMG1202-TSeries must be the same. Type a password of up to 255 printable

characters found on an English-language keyboard.

Connection

Request Path

Type the IP address or domain name of the AMG1302/AMG1202-TSeries. The management

server uses this path to verify the AMG1302/AMG1202-TSeries.

Connection

Request Port

The default port for access to the AMG1302/AMG1202-TSeries from the management server

is port 7547. If you change it, make sure it does not conflict with another port on your

network and it is recommended to use a port number above 1024 (not a commonly used

port). The management server should use this port to connect to the AMG1302/AMG1202-

TSeries. You may need to alter your NAT port forwarding rules if they were already

configured.

Connection

Request

UserName

The user name is used to authenticate the management server when connecting to the

AMG1302/AMG1202-TSeries. Type a user name of up to 255 printable characters found on

an English-language keyboard. Spaces and characters such as @#$%^&*()_+ are allowed.

Connection

Request

Password

The password is used to authenticate the management server when connecting to the

AMG1302/AMG1202-TSeries. Type a password of up to 255 printable characters found on an

English-language keyboard. Spaces are not allowed.

Inform Select Enable to have the AMG1302/AMG1202-TSeries periodically send information to the

management server (recommended if CWMP is enabled) or select Disable to not have the

AMG1302/AMG1202-TSeries periodically send information to the management server

Inform Interval The interval is the duration in seconds for which the AMG1302/AMG1202-TSeries must

attempt to connect with the management server to send information and check for

configuration updates. Enter a value between 1 and 86400 seconds.