User's Manual

ManualsBrandsZyXEL Communications ManualsElectronicsWireless N ADSL2+ 4-port Gateway

Table Of Contents

Dynamic DNS Setup
- 13.1 Overview
  - 13.1.1 What You Can Do in the DDNS Screen
  - 13.1.2 What You Need To Know About DDNS
- 13.2 The Dynamic DNS Screen
Filters
- 14.1 Overview
  - 14.1.1 What You Can Do in the Filter Screens
  - 14.1.2 What You Need to Know About Filtering
- 14.2 The IP/MAC Filter Screen
- 14.3 IPv6/MAC Filter
Firewall
- 15.1 Overview
  - 15.1.1 What You Can Do in the Firewall Screens
  - 15.1.2 What You Need to Know About Firewall
- 15.2 The Firewall General Screen
- 15.3 The Default Action Screen
- 15.4 The Rules Screen
- 15.5 The DoS Screen
  - 15.5.1 The DoS Advanced Screen
  - 15.5.2 Configuring Firewall Thresholds
- 15.6 Firewall Technical Reference
Parental Control
- 16.1 Overview
- 16.2 The Parental Control Screen
  - 16.2.1 Add/Edit Parental Control Rule
Certificate
- 17.1 Overview
  - 17.1.1 What You Can Do in this Chapter
- 17.2 What You Need to Know
- 17.3 Local Certificates
- 17.4 The Trusted CA Screen
- 17.5 Trusted CA Import
- 17.6 View Certificate
Logs
- 18.1 Overview
  - 18.1.1 What You Can Do in this Chapter
  - 18.1.2 What You Need To Know
- 18.2 The System Log Screen
Traffic Status
- 19.1 Overview
  - 19.1.1 What You Can Do in this Chapter
- 19.2 The WAN Status Screen
- 19.3 The LAN Status Screen
- 19.4 The NAT Screen
User Account
- 20.1 Overview
- 20.2 The User Account Screen
TR-069 Client
- 21.1 Overview
- 21.2 The TR-069 Client Screen
System Settings
- 22.1 Overview
  - 22.1.1 What You Can Do in the System Settings Screens
- 22.2 The System Screen
- 22.3 The Time Screen
Firmware Upgrade
- 23.1 Overview
- 23.2 The Firmware Screen
Backup/Restore
- 24.1 Overview
- 24.2 The Backup/Restore Screen
- 24.3 The Reboot Screen
Remote Management
- 25.1 Overview
  - 25.1.1 What You Can Do in the Remote Management Screens
  - 25.1.2 What You Need to Know About Remote Management
- 25.2 The WWW Screen
  - 25.2.1 Configuring the WWW Screen
- 25.3 The Telnet Screen
- 25.4 The FTP Screen
- 25.5 The SNMP Screen
  - 25.5.1 Configuring SNMP
- 25.6 The DNS Screen
- 25.7 The ICMP Screen
- 25.8 The SSH Screen
  - 25.8.1 SSH Example
Diagnostic
- 26.1 Overview
  - 26.1.1 What You Can Do in the Diagnostic Screens
- 26.2 The General Screen
- 26.3 The DSL Line Screen
Troubleshooting
- 27.1 Power, Hardware Connections, and LEDs
- 27.2 AMG1302/AMG1202-TSeries Access and Login
- 27.3 Internet Access
Setting up Your Computer’s IP Address
IP Addresses and Subnetting
Pop-up Windows, JavaScripts and Java Permissions
Wireless LANs
IPv6
Services
Legal Information
Index

AMG1302/AMG1202-TSeries User’s Guide 217

CHAPTER 23

Firmware Upgrade

23.1 Overview

This chapter explains how to upload new firmware to your AMG1302/AMG1202-TSeries. You can

download new firmware releases from your nearest ZyXEL FTP site (or www.zyxel.com) to use to

upgrade your device’s performance.

Only use firmware for your device’s specific model. Refer to the label on

the bottom of your AMG1302/AMG1202-TSeries.

23.2 The Firmware Screen

Click Maintenance > Firmware Upgrade to open the following screen. The upload process uses

HTTP (Hypertext Transfer Protocol) and may take up to two minutes. After a successful upload, the

system will reboot.

Do NOT turn off the AMG1302/AMG1202-TSeries while firmware upload

is in progress!

Figure 109 Maintenance > Firmware Upgrade

The following table describes the labels in this screen.

After you see the firmware updating screen, wait two minutes before logging into the AMG1302/

AMG1202-TSeries again.

Table 83 Maintenance > Firmware Upgrade

LABEL DESCRIPTION

Current Firmware

Version

This is the present Firmware version.

File Path Type in the location of the file you want to upload in this field or click Browse... to find it.

Browse... Click this to find the .bin file you want to upload. Remember that you must decompress

compressed (.zip) files before you can upload them.

Upload Click this to begin the upload process. This process may take up to two minutes.