User's Manual

ManualsBrandsZyXEL Communications ManualsElectronicsWireless N ADSL2+ 4-port Gateway

Table Of Contents

Dynamic DNS Setup
- 13.1 Overview
  - 13.1.1 What You Can Do in the DDNS Screen
  - 13.1.2 What You Need To Know About DDNS
- 13.2 The Dynamic DNS Screen
Filters
- 14.1 Overview
  - 14.1.1 What You Can Do in the Filter Screens
  - 14.1.2 What You Need to Know About Filtering
- 14.2 The IP/MAC Filter Screen
- 14.3 IPv6/MAC Filter
Firewall
- 15.1 Overview
  - 15.1.1 What You Can Do in the Firewall Screens
  - 15.1.2 What You Need to Know About Firewall
- 15.2 The Firewall General Screen
- 15.3 The Default Action Screen
- 15.4 The Rules Screen
- 15.5 The DoS Screen
  - 15.5.1 The DoS Advanced Screen
  - 15.5.2 Configuring Firewall Thresholds
- 15.6 Firewall Technical Reference
Parental Control
- 16.1 Overview
- 16.2 The Parental Control Screen
  - 16.2.1 Add/Edit Parental Control Rule
Certificate
- 17.1 Overview
  - 17.1.1 What You Can Do in this Chapter
- 17.2 What You Need to Know
- 17.3 Local Certificates
- 17.4 The Trusted CA Screen
- 17.5 Trusted CA Import
- 17.6 View Certificate
Logs
- 18.1 Overview
  - 18.1.1 What You Can Do in this Chapter
  - 18.1.2 What You Need To Know
- 18.2 The System Log Screen
Traffic Status
- 19.1 Overview
  - 19.1.1 What You Can Do in this Chapter
- 19.2 The WAN Status Screen
- 19.3 The LAN Status Screen
- 19.4 The NAT Screen
User Account
- 20.1 Overview
- 20.2 The User Account Screen
TR-069 Client
- 21.1 Overview
- 21.2 The TR-069 Client Screen
System Settings
- 22.1 Overview
  - 22.1.1 What You Can Do in the System Settings Screens
- 22.2 The System Screen
- 22.3 The Time Screen
Firmware Upgrade
- 23.1 Overview
- 23.2 The Firmware Screen
Backup/Restore
- 24.1 Overview
- 24.2 The Backup/Restore Screen
- 24.3 The Reboot Screen
Remote Management
- 25.1 Overview
  - 25.1.1 What You Can Do in the Remote Management Screens
  - 25.1.2 What You Need to Know About Remote Management
- 25.2 The WWW Screen
  - 25.2.1 Configuring the WWW Screen
- 25.3 The Telnet Screen
- 25.4 The FTP Screen
- 25.5 The SNMP Screen
  - 25.5.1 Configuring SNMP
- 25.6 The DNS Screen
- 25.7 The ICMP Screen
- 25.8 The SSH Screen
  - 25.8.1 SSH Example
Diagnostic
- 26.1 Overview
  - 26.1.1 What You Can Do in the Diagnostic Screens
- 26.2 The General Screen
- 26.3 The DSL Line Screen
Troubleshooting
- 27.1 Power, Hardware Connections, and LEDs
- 27.2 AMG1302/AMG1202-TSeries Access and Login
- 27.3 Internet Access
Setting up Your Computer’s IP Address
IP Addresses and Subnetting
Pop-up Windows, JavaScripts and Java Permissions
Wireless LANs
IPv6
Services
Legal Information
Index

AMG1302/AMG1202-TSeries User’s Guide 223

CHAPTER 25

Remote Management

25.1 Overview

Remote management allows you to determine which services/protocols can access which

AMG1302/AMG1202-TSeries interface (if any) from which computers.

The following figure shows remote management of the AMG1302/AMG1202-TSeries coming in from

the WAN.

Figure 117 Remote Management From the WAN

Note: When you configure remote management to allow management from the WAN, you

still need to configure a IP filter rule to allow access.

You may manage your AMG1302/AMG1202-TSeries from a remote location via:

• Internet (WAN only)

•LAN only

•LAN and WAN

• None (Disable)

To disable remote management of a service, select Disable in the corresponding Service Access

field.

25.1.1 What You Can Do in the Remote Management Screens

•Use the WWW screen (Section 25.2 on page 224) to configure through which interface(s) and

from which IP address(es) users can use HTTP to manage the AMG1302/AMG1202-TSeries.

•Use the Telnet screen (Section 25.3 on page 226) to configure through which interface(s) and

from which IP address(es) users can use Telnet to manage the AMG1302/AMG1202-TSeries.

•Use the FTP screen (Section 25.4 on page 226) to configure through which interface(s) and from

which IP address(es) users can use FTP to access the AMG1302/AMG1202-TSeries.

LAN

WAN

HTTP

Telnet