User's Manual
Table Of Contents
- Contents Overview
- Table of Contents
- Introduction
- Introducing the Web Configurator
- Internet / Wireless Setup Wizard
- Tutorials
- 4.1 Overview
- 4.2 Setting Up Your DSL Connection
- 4.3 IPv6 Address Configuration
- 4.4 Setting Up a Secure Wireless Network
- 4.5 Configuring the MAC Address Filter for Restricting Wireless Internet Access
- 4.6 Setting Up NAT Forwarding for a Game Server
- 4.7 Configuring Firewall Rules to Allow a Specified Service
- 4.8 Configuring Static Route for Routing to Another Network
- 4.9 Port Binding Configuration
- 4.10 Configuring QoS to Prioritize Traffic
- 4.11 Access the AMG1302/AMG1202-TSeries from the Internet Using DDNS
- Connection Status and System Info Screens
- Broadband
- Wireless LAN
- Home Networking
- Static Route
- Quality of Service (QoS)
- Network Address Translation (NAT)
- Port Binding
Chapter 7 Wireless LAN
AMG1302/AMG1202-TSeries User’s Guide
106
7.9 The Advanced Screen
Use this screen to configure advanced wireless settings. Click Network Setting > Wireless >
Advanced, the screen appears as shown.
See Section 7.10.2 on page 109 for detailed definitions of the terms listed in this screen.
Figure 39 Network Setting > Wireless> Advanced
The following table describes the labels in this screen.
Time (24-Hour
Format)
Specify a time frame during which the schedule would apply.
For example, if you set the time range from 12:00 to 23:00, the wireless LAN will be
turned on only during this time period.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
Table 26 Network Setting > Wireless > Scheduling
LABEL DESCRIPTION
Table 27 Network Setting > Wireless> Advanced
LABEL DESCRIPTION
Fragmentation
Threshold
This is the maximum data fragment size that can be sent. Enter a value between 256 and
2346.
Output Power Set the output power of the AMG1302/AMG1202-TSeries. If there is a high density of APs
in an area, decrease the output power to reduce interference with other APs. Select one
of the following: 100%, 75%, 50% or 25%.
Preamble Select a preamble type from the drop-down list menu. Choices are Long or Short. See
the Appendix D on page 285 for more information.