User's Manual

Table Of Contents
Chapter 1 Introduction
AMG1302/AMG1202-TSeries User’s Guide
18
Figure 4 Front Panel LEDs
.
Table 1 LED Descriptions
LED COLOR STATUS DESCRIPTION
(POWER)
Green On The AMG1302/AMG1202-TSeries is receiving power and ready for
use.
Blinking The AMG1302/AMG1202-TSeries is self-testing.
Red On The AMG1302/AMG1202-TSeries detected an error while self-
testing, or there is a device malfunction.
Off The AMG1302/AMG1202-TSeries is not receiving power.
Ethernet 1-4 Green On The AMG1302/AMG1202-TSeries has an Ethernet connection with
a device on the Local Area Network (LAN).
Blinking The AMG1302/AMG1202-TSeries is sending/receiving data to /
from the LAN.
Off The AMG1302/AMG1202-TSeries does not have an Ethernet
connection with the LAN.
(WPS/WLAN)
Green On The wireless network is activated.
Blinking The AMG1302/AMG1202-TSeries is communicating with other
wireless clients.
Green Blinking The AMG1302/AMG1202-TSeries is setting up a WPS connection.
Off The wireless network is not activated.
(DSL)
Green On The DSL line is up.
Blinking The AMG1302/AMG1202-TSeries is initializing the DSL line.
Off The DSL line is down.
(INTERNET)
Green On The AMG1302/AMG1202-TSeries has an IP connection but no
traffic.
Your device has a WAN IP address (either static or assigned by a
DHCP server), PPP negotiation was successfully completed (if
used) and the DSL connection is up.
Blinking The AMG1302/AMG1202-TSeries is sending or receiving IP traffic.
Red On The AMG1302/AMG1202-TSeries attempted to make an IP
connection but failed. Possible causes are no response from a
DHCP server, no PPPoE response, PPPoE authentication failed.
Off The AMG1302/AMG1202-TSeries does not have an IP connection.
Power Ethernet WLAN WPS InternetDLSDLS