User's Manual
Table Of Contents
- Contents Overview
- Table of Contents
- Introduction
- Introducing the Web Configurator
- Internet / Wireless Setup Wizard
- Tutorials
- 4.1 Overview
- 4.2 Setting Up Your DSL Connection
- 4.3 IPv6 Address Configuration
- 4.4 Setting Up a Secure Wireless Network
- 4.5 Configuring the MAC Address Filter for Restricting Wireless Internet Access
- 4.6 Setting Up NAT Forwarding for a Game Server
- 4.7 Configuring Firewall Rules to Allow a Specified Service
- 4.8 Configuring Static Route for Routing to Another Network
- 4.9 Port Binding Configuration
- 4.10 Configuring QoS to Prioritize Traffic
- 4.11 Access the AMG1302/AMG1202-TSeries from the Internet Using DDNS
- Connection Status and System Info Screens
- Broadband
- Wireless LAN
- Home Networking
- Static Route
- Quality of Service (QoS)
- Network Address Translation (NAT)
- Port Binding
Chapter 4 Tutorials
AMG1302/AMG1202-TSeries User’s Guide
44
3 Click the Start and Register buttons (or the button next to the PIN field) on both the wireless
client utility screen and the AMG1302/AMG1202-TSeries’s WPS screen within two minutes.
The AMG1302/AMG1202-TSeries authenticates the wireless client and sends the proper
configuration settings to the wireless client. This may take up to two minutes. The wireless client is
then able to communicate with the AMG1302/AMG1202-TSeries securely.
The following figure shows you how to set up a wireless network and its security on a AMG1302/
AMG1202-TSeries and a wireless client by using PIN method.