User's Manual
Table Of Contents
- Contents Overview
- Table of Contents
- Introduction
- Introducing the Web Configurator
- Internet / Wireless Setup Wizard
- Tutorials
- 4.1 Overview
- 4.2 Setting Up Your DSL Connection
- 4.3 IPv6 Address Configuration
- 4.4 Setting Up a Secure Wireless Network
- 4.5 Configuring the MAC Address Filter for Restricting Wireless Internet Access
- 4.6 Setting Up NAT Forwarding for a Game Server
- 4.7 Configuring Firewall Rules to Allow a Specified Service
- 4.8 Configuring Static Route for Routing to Another Network
- 4.9 Port Binding Configuration
- 4.10 Configuring QoS to Prioritize Traffic
- 4.11 Access the AMG1302/AMG1202-TSeries from the Internet Using DDNS
- Connection Status and System Info Screens
- Broadband
- Wireless LAN
- Home Networking
- Static Route
- Quality of Service (QoS)
- Network Address Translation (NAT)
- Port Binding
Chapter 4 Tutorials
AMG1302/AMG1202-TSeries User’s Guide
49
Tutorial: NAT Port Forwarding Setup
4.6.1 Port Forwarding
Thomas needs to configure the port settings and IP address on the AMG1302/AMG1202-TSeries.
Traffic should be forwarded to port 666 of the Doom server computer which has an IP address of
192.168.1.34.
Thomas may set up the port settings by configuring the port settings for the Doom server computer
(see Section 11.3 on page 153 for more information).
1 Activate NAT in the Network Setting > NAT > General screen. Click Apply.
2 Click Network Setting > NAT > Port Forwarding. Select PVC0 as the WAN interface and click
Add new rule.
3 Configure the screen with the following values:
D=192.168.1.34
WAN
LAN
port 666
A