User's Manual
Table Of Contents
- Contents Overview
- Table of Contents
- Introduction
- Introducing the Web Configurator
- Internet / Wireless Setup Wizard
- Tutorials
- 4.1 Overview
- 4.2 Setting Up Your DSL Connection
- 4.3 IPv6 Address Configuration
- 4.4 Setting Up a Secure Wireless Network
- 4.5 Configuring the MAC Address Filter for Restricting Wireless Internet Access
- 4.6 Setting Up NAT Forwarding for a Game Server
- 4.7 Configuring Firewall Rules to Allow a Specified Service
- 4.8 Configuring Static Route for Routing to Another Network
- 4.9 Port Binding Configuration
- 4.10 Configuring QoS to Prioritize Traffic
- 4.11 Access the AMG1302/AMG1202-TSeries from the Internet Using DDNS
- Connection Status and System Info Screens
- Broadband
- Wireless LAN
- Home Networking
- Static Route
- Quality of Service (QoS)
- Network Address Translation (NAT)
- Port Binding
Chapter 4 Tutorials
AMG1302/AMG1202-TSeries User’s Guide
50
The screen should look as follows. Click Apply.
4 The port forwarding settings you configured appear in the table. The AMG1302/AMG1202-TSeries
forwards port 666 traffic to the computer with IP address 192.168.1.34.
Players on the Internet then can have access to Thomas’ Doom server.
4.7 Configuring Firewall Rules to Allow a Specified Service
By default the firewall will block traffic originating from the WAN (1). However, if you are running a
server or other service, you may need to allow access from the WAN (2). The following tutorial will
show how to allow traffic from WAN to LAN if it matches a specified port number.
Service Name Select User Define.
Start/End Ports Enter 666 as the Start and End port.
Server IP Address Enter the IP address of the Doom server (192.168.1.34 for this example).
E
X
AMPLE
EX
AMPLE